The ones Mr. Bryant supplies now are made of Delerin. I've been using them
for a few months now, (running my TD almost every day) and they work great.
Thank you Mr. DuBois for putting me onto this guy...
-Scott Allen
>From: Dave and Liz DuBois <ddubois@sinclair.net>
>Reply-To: ddubois@sinclair.net
>To: Bill Loubiere <loubiere@earthlink.net>
>CC: mg-t@autox.team.net
>Subject: Re: TD Choke Cable
>Date: Sun, 20 Aug 2000 17:38:03 -0700
>
>Bill,
> Sounds like the seals on your jets are sticky or sombody put 'O'
>rings in place of the cork seals. The cork seals are very hard to keep
>from leaking, so people substitute nitrile or viton 'O' rings. After a
>period of time the 'O' rings begin to swell and cause the choke to be
>very difficult to pull out. The only cure for this problem that I have
>found has been to use a teflon or a teflon coated silicon 'O' rings.
>You can obtain these 'O' rings in the proper size from Tom Bryant, 272
>New Medows Rd, West Bath, ME 04530. Phone (207) 443-6338.
>
>Good luck,
>Dave
>
________________________________________________________________________
|