Art,
Could you do me a favor and measure the length of the flexible fuel line between
the carbs on your car? I need the distance from the outside of the banjo
fitting
on the front carb to the outside of the screw-on fitting on the other end. The
one on my car is 13 1/2" long. The one that Moss sent me is 16 7/16" long.
Also
if you could estimate (or measure) the length of the flexible fuel line from the
steel fuel line to the rear carb I would appreciate it. The one Moss sent seems
so long that it will stick up and hit the bonnet when it is closed. Thanks a
lot.
I'm getting to the point where I'm about ready to go see if I can have an auto
parts shop to make one up for me using my fittings. The only reason that I did
not do that earlier is that I was trying to maintain the original look. However
the Moss lines don't look original anyway since their outside diameter is much
smaller than that of the original line.
Kevin
AMafli@aol.com wrote:
> Hi Kevin,
>
> You have made a wonderful choice buying a RHD 1500 TF. That is a rare MG here
> in the States. Do you have, or are you able to get any history about the car?
> At present, I own a beautiful BRG 1500 which is undergoing the final stages
> of restoration. I had owned a 1500 in the 1960s. Please send an e mail if you
> need any help, information, etc. I'd be glad to chat.
>
> Cheers,
>
> Art Mafli
|