>
> Rick, you need a rubber bushing installation tool set and a press or at
> least a good vice. The tool set consists of a inner tapered sleeve that
> allows
> you to compress the rubber and push it into the shock arm hole or lower
> link hole. Then follow with a tapered 1/2" pin to expand the bushing bore
> and follow the tapered pin with the shock link or lower pin. A job that
> sounds easy but is always difficult, even with the tool set.
Agreed...I have the moss installation kit and it's still hard to install the
bushes. I have wrecked a couple of bushes in the installation process.
regards
John Swanland
Melbourne Australia
|