mg-mmm
[Top] [All Lists]

RE: PA distributor question

To: "'Kevin Allocca'" <kevin-allocca@msn.com>, <mg-mmm@autox.team.net>
Subject: RE: PA distributor question
From: "Lew Palmer" <lpalmer@roundaboutmanor.com>
Date: Thu, 9 Feb 2006 20:28:31 -0600
In-reply-to: <BAY0-SMTP04F55C4F0FDB7BCFE4F684F8030@phx.gbl>
Reply-to: "Lew Palmer" <lpalmer@roundaboutmanor.com>
Sender: owner-mg-mmm@autox.team.net
Thread-index: AcYtlXyFFJOPHv8kRjmznt85YmCwawAU5UNA
You can have them machined up by any good machine shop, or order them from
any bearing/bushing shop. You'll need the inside diameter of the body and
the outside diameter of the shaft as well as the length of the old bushings.
You can order them from Sports and Vintage, but you'll pay a hefty premium.

Cheers,
Lew Palmer

-----Original Message-----
From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net] On
Behalf Of Kevin Allocca
Sent: Thursday, February 09, 2006 10:26 AM
To: mg-mmm@autox.team.net
Subject: PA distributor question

My wrench twister tells me I need bushings for my distributor, is there a
source in the US?
Thanks
Kevin Allocca
PA1388
 
Kevin M. Allocca
 
Towne & Country Real Estate
1900 Manakin Rd. Manakin-Sabot, VA 23103
kevin@sellingrichmond.com
www.sellingrichmond.com <http://www.sellingrichmond.com/> 
804-784-2050 ext 207-work
804-784-6162-fax
804-909-5751-cell

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>