Don,
It is also wired to the hot side of the ammeter. The other terminal in the
middle goes to the ignition warning lamp and the IGN point on the
cutout/fuse box.
Cheers,
Lew Palmer
-----Original Message-----
From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net] On
Behalf Of Peter Green
Sent: Sunday, March 06, 2005 12:55 PM
To: DB35PA@aol.com; mg-mmm@autox.team.net
Subject: Re: PA (PLC) wiring question
Don,
Yes the second terminal you describe is jumpered/bridged to the A terminal.
Peter.
----- Original Message -----
From: <DB35PA@aol.com>
To: <mg-mmm@autox.team.net>
Sent: Sunday, March 06, 2005 4:12 PM
Subject: PA (PLC) wiring question
> Hello gents,
>
> Currently wiring on back of instrument panel... specifically the PLC
> switch.
>
> In the center of the switch, are two raised terminal points. One is marked
> as ING (ignition) while the other is not identified. This second one is my
> concern.
>
> it appears it might be "jumpered" to terminal A but I cannot tell. I
> have
> two enlarged wiring diagrams but both are so blurry (Might be these 63
> year
> old eyes) I can't tell. Anyone have a better copy or can confirm/refute
> this
> connection?
>
> Thanks
>
> Don B.
>
> /// unsubscribe/change address requests to majordomo@autox.team.net or
> try
> /// http://www.team.net/cgi-bin/majorcool
> /// http://www.team.net/mailman/listinfo
> /// Archives at http://www.team.net/archive/mg-mmm
> /// Send list postings to mg-mmm@autox.team.net
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|