Brian,
I used PPG's DP90 black epoxy primer followed by a couple of coats of
acrylic enamel. Looks great and wears well.
Cheers,
Lew Palmer
-----Original Message-----
From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net] On
Behalf Of Kellmg@aol.com
Sent: Friday, March 19, 2004 8:24 PM
To: mg-mmm@autox.team.net
Subject: Chassis paint?
Hi Listers,
Has anyone had experience with the paint product "Por 15"?
www.por15.com/product.asp?productid=6
www.por15.com
Basically, I'm wondering if it's worth while using this product if I'm going
to sandblast the chassis. The website leads me to believe that the paint is
for rusty metal coverage. The paint is expensive along with the prep
materials
required. What did impress me was the fact that they produce it in a semi
gloss, which I prefer for the chassis. As a matter of interest, I use their
product
"Manifold Gray" brushable and easy to touch up. Works a treat.
I'm not interested in powder coating for the chassis so, that's not an
issue.
Any other products or ideas or suggestions for painting directly after
sandblasting?
Brian Kelly.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|