mg-mmm
[Top] [All Lists]

Re: P type engine

To: DENKLEMM@aol.com, mg-mmm@autox.team.net
Subject: Re: P type engine
From: TATERRY@aol.com
Date: Tue, 6 May 2003 09:25:05 EDT
Reply-to: TATERRY@aol.com
Sender: owner-mg-mmm@autox.team.net
In a message dated 5/6/03 06:02:16 Pacific Daylight Time, DENKLEMM@aol.com 
writes:

<< The clutch spigot bearing (ball bearing mounted to the flywheel) appears 
not 
 to be lubricated. Is this correct or should a small amount of grease by 
 applied during assembly? >>

Dennis, I recommend that you use a permanently sealed, prelubricated 
bearing.....your local bearing dealer can get one for you.  Definitely not 
dry!
Terry

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>