Does anyone have a detailed drawing or picture of Junction box for 35 PA?
I've enlarged wiring diagram to the size of a table top but it's still so
"fuzzy" I can't make it out. Looking specifically for labels on individual
terminal points.
Same topic, my PLC switch is a Lucas model 2 with 4 positions or "windows" 1,
2, side and head. On the back there are 9 terminals around the perimeterb& 4
from approx. 5,6,7, & 8 o'clock then 5 from 11 to 3 o'clock. In addition,
there are 2 terminals in the middle at approx. 10 and 4 o'clock. Some have
identifiers, such as F 1, F 2, D, & G1b&. Most do not. The copy of the
original wiring drawing shows approx. 8 terminals (again I can't make out the
labels) in total so clearly either my PLC is a different model or they are
only showing "active" locations. Can anyone clarify?
The car was a basket case so tracking down from the original isn't possible.
Thanks,
Don Bonar
Prairie Village, KS
dsbonar@aol.com
British Cars Web: http://www.team.net/sol
MMM list subscription info: http://www.team.net/cgi-bin/majorcool
|