mg-mmm
[Top] [All Lists]

Re: Water Pump Impeller & Cooling generally

To: pmullen@direct.ca, mg-mmm@autox.team.net
Subject: Re: Water Pump Impeller & Cooling generally
From: Bill707@aol.com
Date: Fri, 11 Feb 2000 12:06:51 EST
Reply-to: Bill707@aol.com
Sender: owner-mg-mmm@autox.team.net
In a message dated 2/11/00 8:37:52, pmullen@direct.ca writes:

<<  - How & where do you fit the thermostat on the P? Does it need a
pressure release hose for when the water is atill too cool to open it?
 - Thermostat details (model, design)?
 - Do you have exhaust valve hardened inserts? OR
 - Do you use a lead substitute additive in the fuel? >>
Pat,
The thermostat is from Restoration Supply Co. Reno NV. It fits right nicely 
in the hose just above the outlet end of the return water manifold (at least 
on the P), and sells for $20. It is a 160 degree unit 1-1/2" in dia. and 
2-1/8" long with a bypass hole. They also sell Penrite lube products 
including a terrific 1000w steering box goop! And, many other vintage car 
type stuff.

 
<restoration@rsa.reno.nv.us>  24 hr FAX775-825-5663, It's Tom & Dottie and 
tell 'em I sent you!

I don't have hardened seats, and DO use a lead sustitute.

Cheerz
Bill


<Prev in Thread] Current Thread [Next in Thread>