Skip - Here's another way to look at this, I suppose an engineer's
viewpoint. Each cylinder is still making about the same amount of
mechanical power. But if it isn't getting to the flywheel then it is
bouncing around inside the mechanism trying to break things. It may not seem
like much; but think about the amount of work 5 or 10 horsepower can do in
your shop cutting or hammering metal.
Ed Weldon
----- Original Message -----
From: "Skip Higginbotham" <saltrat@pahrump.com>
To: "John Burk" <joyseydevil@comcast.net>; "LandSpeed List"
<Land-speed@autox.team.net>
Sent: Friday, June 03, 2011 7:44 AM
Subject: Re: [Land-speed] BBC Firing Order .
> John,
......... Dyno tests say it gives a little more power....more is better??!!
and
> runs smoother....smoother would imply less interference from harmful
> harmonics. Small improvements sometimes result from subjective
> analysis.......I needed to chage cams anyway......
> Skip
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|