I say stick with the normal amount unless someone with real experience
suggests less. What you don't want is more that will create a rapid
overheating of the bearings from friction release in the churning of too
much grease.We never saw problems in 200 mph cars we ran; but the weight
loads were pretty light in the lakester and modified roadster.(Doug King's
cars)
Ed Weldon
----- Original Message -----
From: "John Burk" <joyseydevil@comcast.net>
To: "LandSpeed List" <Land-speed@autox.team.net>
Sent: Tuesday, March 09, 2010 2:30 PM
Subject: [Land-speed] Packing wheel bearings
> Should I put a normal amount of grease in my taper roller wheel bearings ?
> I'm
> using killer expensive Kluber synthetic grease , NBU15 (high speed -
> moderate
> load) .
> _______________________________________________
> Land-speed@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/land-speed/23.weldon@comcast.net
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|