Don't forget that if the wires are of equal length, the absolute delays
cancel since you are looking only at the time difference.
Regards, Neil Tucson, AZ
-----Original Message-----
From: land-speed-bounces@autox.team.net
[mailto:land-speed-bounces@autox.team.net] On Behalf Of Kirkwood
Sent: Wednesday, September 02, 2009 1:55 PM
To: 'Dave Dahlgren'; land-speed
Subject: [Land-speed] British Steam effort 139.843mph
I was very careful NOT to mention accuracy in my response to Malcolm.
Accuracy is a completely different issue. You not only have the wire to
consider but the latency of the photo cell and the speed of light. If the
lights are 1000ft apart (across the track) you have a 1000NS delay for
arrival to the photo cell. We also don't know the precision of the surveyed
mile. It was not my intent to open up another can or worms! My point was if
you only have 0.001sec resolution you are introducing diminished precision
when rounding to mph.
-----Original Message-----
From: Dave Dahlgren [mailto:ddahlgren@snet.net]
You can go to 20 places past the decimal point and not be accurate though
you might imply it. How do the compensate for the length of the wire?
Land-speed mailing list
You are subscribed as neil@dbelltech.com
http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|