land-speed
[Top] [All Lists]

[Land-speed] Ballast

To: LSR <land-speed@autox.team.net>
Subject: [Land-speed] Ballast
From: drmayf <drmayf@mayfco.com>
Date: Wed, 03 Sep 2008 19:11:36 -0700
I keep reminding mysef that the Sunbeam is pretty light weight. So to 
that end Ihave been looking for ballast. I have these lovely rectangular 
tube frame rails which beg to be filled with something.  So I was 
messing around th eother day on ebay and found something that interested 
me. It is a steel shot grit used in blasting heavy iron castings. It 
comes in a lot of different grit sizes from 0.007 to something like 
0.025 diameters. Smaller is more dense. And th stuff is oiled so it is 
kinda slippery (according to the guy I chatted with)  Has any amoung you 
ever used such a product as ballast? I would pur the stuff into the 
frame tubes and then seal the end to keep it all in place. And since 
this is frame, it is way down low which is good.  I figure I have enough 
frame locations to add about 400 pounds to the car just this way.

Anybody use something like this?

mayf
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>