Neil
Yeah and he has two sizes of nuts so he said. Or is he just a little nuts
LOL!!!!
Glen
----- Original Message -----
From: "Albaugh, Neil" <albaugh_neil@ti.com>
To: "Glen Barrett" <speedtimer@charter.net>; "Mike Meierle"
<mike.meierle@alcatel.com>; "Keith Turk" <kturk@ala.net>;
<land-speed@autox.team.net>
Sent: Wednesday, August 02, 2006 10:35 AM
Subject: RE: Glen... don't you even...
> Mike;
>
> If you use stainless nuts on stainless bolts, you'd better use a good
> anti- seize compound when you assemble your headers. Stainless tends to
> gall badly, especially at high temperature.
>
> Regards, Neil Tucson, AZ
>
> ----- Original Message -----
> From: "Mike Meierle" <mike.meierle@alcatel.com>
> To: "'Keith Turk'" <kturk@ala.net>; <land-speed@autox.team.net>
> Sent: Wednesday, August 02, 2006 6:51 AM
> Subject: RE: Glen... don't you even...
>
>
>> Sound Like me at the Hardware store yesterday, needed new METRIC nuts
> and
>> washers for the exhaust manifold, stop at Home Depot, what a joke in
> the
>> metric Dept. go to the local GOOD hardware Store, Find the Nuts and
>> washers
>> I need, look around a bit, hey there are Hardened ones! Put back the
>> others,
>> fish out my count re-mark the bag with new prices, walk down the
> aisle,
>> Whoa! Stainless Steel!!! Put the hardened ones back (PITA) fish out my
>
>> count
>> of nuts and washers again, throw away old bag start with a new bag,
> mark
>> the
>> prices again, all of that just because I can't stand having two size
> nuts
>> for one application...
>> I'm only trying to make Maxton in September!
>>
>> {rant switch=off}
>>
>> Mike Meierle
>> #847 F/P/MP
>> ECTA Record Holder
|