Dave;
Laser Q-switches usually use Kel-F as a high- voltage insulation.
Regards, Neil Tucson, AZ
-----Original Message-----
From: owner-land-speed@autox.team.net
[mailto:owner-land-speed@autox.team.net] On Behalf Of Dave Dahlgren
Sent: Wednesday, February 23, 2005 2:10 PM
To: Joe & Lynne Lance; wester6935@comcast.net; Keith Turk; DrMayf; Bryan
Savage; List Land Speed
Subject: RE: Laser Ignition / cam profiles
What would you suggest for a dielectric for 80k volts that is only
around
3/16 thick. Them plug wells in a hemi are not all that big so air won't
help
much..
Dave
|