Probably does a little with the 8's.
Since the Cup boyz run the 9's, would think that's the way to go.
JB
----- Original Message -----
From: "George Mitchell" <gmitchell@trifectahobbies.com>
To: "George Mitchell" <gmitchell@trifectahobbies.com>;
<dwarner230@yahoo.com>; <land-speed@autox.team.net>; <BWANA343@aol.com>;
"John Beckett" <saltracer@servusa.com>
Sent: Monday, January 24, 2005 5:45 PM
Subject: Re: tires for Maxton
> John
>
> Does it begin to "crown " with that size rim?
> George in DC
> ---------- Original Message ----------------------------------
> From: "John Beckett" <saltracer@servusa.com>
> Date: Mon, 24 Jan 2005 17:42:15 -0500
>
> >The Cup boyz run a 15 x 9" wheel with those tires. I've run them with 15
x
> >8's.
> >
> >JB
> >----- Original Message -----
> >From: "George Mitchell" <gmitchell@trifectahobbies.com>
> >To: <dwarner230@yahoo.com>; <land-speed@autox.team.net>;
<BWANA343@aol.com>
> >Sent: Monday, January 24, 2005 5:22 PM
> >Subject: tires for Maxton
> >
> >
> >> Hey there list.
> >> Trying to get parts for our testing at Maxton this year .
> >> I was planning on ordering some Talledega Goodyears for the rear of my
> >camaro. I see that the recomendation is a ten inch rim.For those that
have
> >run this tire is this the rim size you have used and what psi did you
run.
> >> Or...
> >> Is there another tire or rim size you would recommend keeping in mind
that
> >I have over 1150 horsepower.
> >> Thanks for the help
> >> George in DC
|