or you go to Ace Hardware, and buy
smooth steel 1/8 th pipe couplings,
machine or cut in half, gives you
2 for 79 cents.....................
Joe :)
----- Original Message -----
From: "Keith Turk" <kturk@ala.net>
To: "Sparky" <wmtsmith@landracing.com>; <land-speed@Autox.Team.Net>
Sent: Saturday, October 09, 2004 9:05 PM
Subject: EGT probe bungs...
> I used a 3/4" hole saw on 1/8th or 3/16th's steel plate.... then I took
the
> plugs... welded them on and tapped them with a 1/8th" pipe tap.... instant
> bung just add labor
>
> Keith
> -----
|