Re: Defining CG location

land-speed

Re: Defining CG location

To:	<land-speed@autox.team.net>
Subject:	Re: Defining CG location
From:	"John Burk" <joyseydevil@comcast.net>
Date:	Wed, 30 Jun 2004 23:36:32 -0400

To calculate the height of the CG combine the weight and height above ground
(inch lbs) , of all the parts in the car (engine , trans , chassis etc - The
CG height is the combined in.lbs. of all the parts divided by the total weight
.

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Defining CG location, John Burk <=

Previous by Date:	Re: data acq and high cost of electronics, Joe Amo
Next by Date:	data acq and high cost of electronics, 3liter
Previous by Thread:	CG---fulcrum point, Sparky
Next by Thread:	LSR Scale Models, The Weldons
Indexes:	[Date] [Thread] [Top] [All Lists]