Bill and list
The Ford Zetec engine question I assume requires the engine to be rotated
ninety degrees - to be on the centre line of the car - and to have a
gearbox that can feed power down a prop shaft to the rear axle.
In the UK I would go to Quaife Engineering Limited for the bellhousing and
gearbox
e mail is info@quaife.co.uk
If the engine mounts to a trans axle then call on Hewland Engineering
e mail is william.h@hewland.com
neither are budget solutions, but would be reliable.
What power is being handled? A UK kit car maker might suggest one of the
cheaper four or five speed transmissions from UK Fords that had their
engines in line - the Sierra, Granada or Cortina models for example. A ZF
gearbox might be an alternative for a powerful engine tune.
there may be clues on conversion kits on www.raceline.co.uk who work with
Zetec motors.
good luck
Malcolm Pittwood, Derby, England
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|