land-speed
[Top] [All Lists]

Re: information needed

To: gary baker <lsr350@hotmail.com>
Subject: Re: information needed
From: Joe Amo <jkamo@rap.midco.net>
Date: Wed, 09 Jul 2003 08:50:55 -0600
normal EGT for turbo higher than others
instead of 1340-1400, your likely to have
1500-1600+

Dahlgren looks at these numbers daily

wait for him to chime in

Joe :)

gary baker wrote:

> G'Day
> just recieved my programmable aero instruments  and I need some 
> parameters to enter  like 1.the max temp running up to 3 bar turbo in 
> EGT( or large hits of N2O ) methanol is the fuel   2. as above for 
> CHT  and oil temp and water temp  all the instruments have an O/P for 
> an alarm and I need to give a max temp for normal running temps   so 
> if they are exceeded the O/P activates  which I,m using to shut down 
> motor , fuel and electricial ( they come with a black box data 
> recorder and a whole lot of other stuff I dont need )  also what is 
> the best location for the EGT probes ie. how far from the exhaust 
> ports  on the headers  there will be one probe for each cylinder  as 
> the EGT meter is a quad setup and reads each independintly  I have 
> set  1200 for EGT 360 for CHT 185 for oil and 220 for water  and 2.5 " 
> for the probes ?? are these inthe ball park   temp in deg F  oh and 
> how do I make a pitot tube  for the air speed indicator  ??
> Gary (
>
> _________________________________________________________________
> Hot chart ringtones and polyphonics. Go to  
> 
>http://ninemsn.com.au/share/redir/adTrack.asp?mode=click&clientID=174&referral=Hotmail_taglines_plain&URL=http://ninemsn.com.au/mobilemania/default.asp
> 

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>