John, I have no experience with one yet--I bought one to use as a transfer
pump from a sump that my turbos will drain into back to the eng -- I might use
it to feed the turbos. I just remembered that KT had mentioned he had seen one
at Gribbs--much later I bought one for I thought it would solve my problem with
the remote mounted turbos. wmts
>
> From: John Goodman <ggl205@yahoo.com>
> Date: 2003/06/15 Sun AM 07:44:56 CDT
> To: land-speed@autox.team.net
> Subject: Re: Oil Pumps
>
> Sparky, would this electric pump work as a motorcycle
> engine dry sump pump? Are they reliable?
>
> John
> --- Sparky <wmtsmith@landracing.com> wrote:
> > Jon, I bought a used 12V from Gibb at
> > Motorsports--Keith has one he might sell--also
> > Grainger has a 12V brass pump for marine use that
> > should work also--I assume you are using it for a
> > TURBO sump pump? The used Tilton is slightly smaller
> > than the Grainger--it does not have a mounting
> > bracket like the Grainger part # 4P062. $123.
> > >
> > > From: "Jonathan Amo" <webmaster@landracing.com>
> > > Date: 2003/06/15 Sun AM 12:21:39 CDT
> > > To: "LSR List" <land-speed@autox.team.net>
> > > Subject: Oil Pumps
> > >
> > > List,
> > >
> > > We may have discussed this before but anybody have
> > any ideas they can strike
> > > me with for a electrical oil pump. I will be
> > pumping about 3 qt of oil. This
> > > will be going on a motorcycle so size does matter.
> > Any info would be great.
> > >
> > > Jonathan
>
>
> __________________________________
> SBC Yahoo! DSL - Now only $29.95 per month!
>>
"Sparky"
Lakester 2211
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|