land-speed
[Top] [All Lists]

Re: SBC Question

To: Scott Christensen <saltrunner31@hotmail.com>
Subject: Re: SBC Question
From: Ed Van Scoy <ed@vetteracing.com>
Date: Fri, 2 May 2003 21:26:29 -0700
Well, yes....and no. Depends on what applications you are
looking at. I have a bow tie block in the Vette that from
outward appearances could be 300 to 427+ CID. Only Dan Warner
knows for sure ;-)
Ed

>
>Dick,
>      283 and 327's have an oil breather at the back of the
block next to 
>the distributor.....350's don't. They also had the oil filler
in the intake, 
>not the valve covers. Or you could look up the numbers......
>
>see ya   scott
>
>
>
>
>
>
>>From: Dick J <lsr_man@yahoo.com>
>>Reply-To: Dick J <lsr_man@yahoo.com>
>>To: Dave Dahlgren <ddahlgren@snet.net>
>>CC: land-speed@autox.team.net
>>Subject: SBC Question
>>Date: Fri, 2 May 2003 15:19:14 -0700 (PDT)
>>
>>Excluding numbers, how do you tell a completely assembled
and running SBC 
>>327 from a 350?
>>
>>Dick J In East Texas
>
>>
>
>
>_________________________________________________________________

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/land-speed
///  what is needed.  It isn't that difficult, folks.


<Prev in Thread] Current Thread [Next in Thread>