Scott;
Check the cam timing with a degree wheel. This is more important with a
longer duration high- lift cam.
Regards, Neil Tucson, AZ
-----Original Message-----
From: Scott Cowle [mailto:scowle@mentorcollege.edu]
Sent: Monday, February 24, 2003 1:44 PM
To: land-speed@autox.team.net
Subject: mechanical cams
Well, I finally got my cam in the engine, lifters too.Anything I should
focus on with this type of cam as opposed to a hydraulic, other than being
careful about valve lash? Scott
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|