Re: Dry sump

["Richard Fox" <v4gr@rcn.com>]

----- Original Message -----
From: "Glenn Ridlen" <gridlen@yahoo.com>
To: "Richard Fox" <v4gr@rcn.com>; "DrMayf" <drmayf@teknett.com>;
<land-speed@autox.team.net>
Sent: Sunday, January 26, 2003 03:02 PM
Subject: Re: Dry sump


> Richard
> So, your oil pump is external?   belt driven?   but not a dry sump???
>
Glenn
>  Richard Fox <v4gr@rcn.com> wrote:I don't know anything about any of this
but I do run a preoiler on motors I
> assemble, using a Mellings 460 Ford oil pump and my 3/8s drill motor.
Glenn; Yes I have a single stage belt driven external  pump on the Ply. This
was caused by the very small stock '32 pump being broken. If you wanted to
fuse a electric pump and run the ignition off the same fuse it seems like it
would be pretty much the same.      Rich

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/land-speed
///  what is needed.  It isn't that difficult, folks.