Thanks for "outing" yourself, Todd. Look forward to hearing more from you &
Dahmurf.
Dale C.
Subject: Re: rocker arm ratios
Hey Scott(and all)... I've never posted on here before
and have randomly lurked for a few.
Name's Todd Dross, g-friend(manager to say the least)
is Dahmurf(Debbie Heneman) that peeks in a little more
then me, and I've ran in Maxton for a couple years
now(both bike #'s 1300mine & 842todd brooks) and have
met you Scott when you first came down and again this
year. Just wanted to say hey and thanx to all for the
good info I see here from time to time, bonneville is
in my sights someday but for now live thru Dad Land's
stories of the salt on a 1000cc harley and ya'll
telling your tales of triumph and defeat. Hope to get
in and look here a little more often now.
Your lift with that cam should end up at .594 with 1:6
rockers if I'm not mistaken Scott, I've always liked
your car since day one you got to the concrete.
Todd-
--- Scott Cowle wrote:
> The mechanical cam going into my 440 plymouth
> has an advertised lift of
> .557 inches with rockers that have a 1:5 ratio. How
> much would 1:6 ratio
> rockers affect this, my math skills suck.
> Scott
----------------------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient or employees of
MD Helicopters, Inc. is prohibited. If you received this in error, please
contact the sender by email and delete the material from any computer..
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|