I'll second Keiths method. On my diesel van, I used a front hitch mount that
accepts a 2" tube and fabricated the bar from there. I used the fabricated
piece as an air dam, then turned upside down for proper height to push off
the Merkur. You can make it as pretty or as plain as you want. Worked good
for the Turbinator too.
Rick Byrnes
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|