land-speed
[Top] [All Lists]

Re: Re: Vortex generators

To: Nt788@aol.com, wester6935@attbi.com, land-speed@autox.team.net
Subject: Re: Re: Vortex generators
From: <wmtsmith@landracing.com>
Date: Thu, 12 Sep 2002 17:25:32 -0400
If I rode a Bike  I would have some body armour on the back of my leathers that 
would look an awfully like a couple of Nish's strips just to see if it made a 
difference on how I felt on the Bike. wmts
> 
> From: Nt788@aol.com
> Date: 2002/09/12 Thu PM 12:39:31 EDT
> To: wester6935@attbi.com,  land-speed@autox.team.net
> Subject: Re: Vortex generators
> 
> In a message dated 9/11/2002 3:41:09 PM Pacific Daylight Time, 
> wester6935@attbi.com writes:
> 
> << They solved the problem by installing an 11 X 5 (or so) strip of white
>  plastic, 2 rows deep with vortex generators, on either side of the car in
>  front of the chute tubes.  It not only solved the problem but the parachutes
>  opened and followed the car in perfect alignment without twisting or blowing
>  to either side as they had been doing.  Rick Vesco commented on how well
>  they were deploying. >>
> Now that's some good info! Jack

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/land-speed
///  what is needed.  It isn't that difficult, folks.


<Prev in Thread] Current Thread [Next in Thread>