Howdy,
well, Speedway has Moon copies fairly cheap, buying one is
probably less than shipping one back and forth, and it'll give me
something >else< to do, in the 89 days till I should be ready to begin the
final serious thrashing to get ready to go out to the Salt.
At 08:40 AM 5/6/02, you wrote:
>John,
> If you don't want to sacrifice a disk to make the jig, Moon will loan
>you one for a refundable deposit.
>
>Jim in Palmdale
>
>
> > Pretty close John.... basically what I did was cut a 1 and a half inch
>slot
> > just below the hole that the dzus button goes in... about 3 inches long...
> > then I set the tabs on the disc... so what you have is three tabs mounted
> > to a disc with the metal exposed where it touches the rim.... then I
>tacked
> > the tabs on the wheels and took off the disc and did the final welding....
> > in my case on my wheels I set it up so that the tab had to be bent 1/4 of
> > an inch and that allowed a bit more welding surface on the rim....
> >
> > Works great... never had an issue... and I don't have to mess with those
> > nasty little screws...
> >
> > You will love it...
> >
> > K
John Robinson, Mechanician
Mechanical Engineering University of Wisconsin
1513 University Ave.
Madison, Wi. 53706
608-262-3606
FAX 608-265-2316
Current World Land Speed Record Holder
Bonneville Salt Flats
H/GCC 92 cu.in. 1980 Dodge Colt
131.333 MPH set 1995
136.666 MPH set 1996
140.292 MPH set 2000
144.396 MPH set 2000
MPS-PG 441 c.c. 1967 BSA Victor Motorcycle
95.193 MPH set 2001
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
|