Okay, heres something I do have some knowledge of.... I used to design and
spec. services installations where I used to work. I do not know of a plastic
that is approved for pneumatic service period. We also had to tear out a lot of
air line that was done in copper and silver soldered, it seems the silver
soldering makes the copper brittle and can cause failure. Hydraulic failure
just makes a mess but an airline failure can kill.
John, the ol' engineer from Procter & Gamble Co.
>
> From: LGMCAFEE@aol.com
> Date: 2002/04/25 Thu AM 11:33:39 EDT
> To: land-speed@autox.team.net
> Subject: plastic air lines
>
> Its like anything else you can do something a 1000 times it's the 1001 that
> gets you I know I won't use plastic I don't care what the schedule is if it
> not the right kind.Larry Mac
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
|