Bill, Clean the area between the second and third pushrod hole and
rocker stud from each end of the head. There will be the date code and
size engine. I looked at
nine sets I have in the shop and they are all that way.
Doug Odom in big ditch
Bill Bennett wrote:
>
> I have a mid to late 80's Ford 5.0 motor. I need to identify the heads on
> it. I have checked the ends of the heads for vertical bars there are none. I
> have pulled the valve covers and there are no obvious casting marks that I
> can know of. I don't want to pull the heads off the motor till I am ready to
> freshen it up, but I need to know what the heads are. They are late model
> with air injection bumps in the exhaust port, but other than that I have no
> idea. The guy I bought the motor from said they weren't original, but he
> couldn't remember what they came out of. I am hoping they are not 1986 heads
> as this would mean my engine swap budget would include a new set of heads
> now. Anybody got any clues as to tell what heads these are without pulling
> one.
>
> Thanks,
>
> Bill
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|