mayf,
If you find a place let me know. I would like to make some injector
stacks with a 90 deg. bend in them out of 2.4375 dia. thin wall tube. I have
tried Hilborne, Kinsler and Ron Davis none of them make them.
Jim in Palmale
> Anybody on the west coast (the correct coast) have a source for mandrel
bent
> thin wall aluminum tubing in the 2 to 3.5 inch range? A place where you
have
> actually bought the stuff? I need a couple or three or four bends for my
> turbo plumbing. Iffn I have to, I can go to steel then I'll get them from
> J.C. Whitney... prefer aluminum...
>
> mayf
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|