I have a V8QC in my roadster and I thought it used the same parts that
Speedway sells as midget parts. What do I know? You might try Norm Rap in
S.F. @ 415-333-8501. He has all kinds of old QC parts and trades change
gears at no charge after he gets to know you. Rich Fox
-----Original Message-----
From: Jim Dincau <jdincau@qnet.com>
To: land speed list <land-speed@autox.team.net>
Date: Tuesday, September 25, 2001 03:13 PM
Subject: Halibradn V-8 QC parts
>Hi all,
> I have a friend who would like to run a locked rear end in his street
>roadster. He has a Halibrand V-8 QC with 50's Ford/Merc axles and ends. As
I
>remember this involves machining the later model spider gears to fit into
>the QC ring gear carrier. Does anyone know who might make or have made a
>spool for this rear end? I remember spider gears with only one or two teeth
>cut in them used instead of welding the spiders but I think they were for
>early type rear ends only. I would hate to have to tell him to weld up the
>spiders. It would probably work (H class engine) but it ain't very elegant.
>Any thoughts?
>Jim in Palmdale
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|