Yep, on the 0.030 over bore. I am now 0.1001 cubic inch in the C class
motor. I leaped before I looked!
Subject: RE: D Motor options...
>
> And, on another issue, you can't run a 3-inch crank with a .030 overbore
> because it is too big (306+ cubes).
> You can run .020 overbore (304.6 cubes) but it is cutting it pretty close.
> The advantage I see with the offset ground crank is that you can run a
.030
> overbore, which makes it easier to find a block (and maybe even get some
> pistons that don't cost an arm and a leg).
>
> David
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
///
|