I have been running Jesel Belt Drive's ... the hype is they dampen out the
harmonic's between the Crank and the Valvetrain.... Biggest reason I saw to
run them was the adjustability allowed in Cam Timing... I made a special
tool and I can adjust the Cam timing in about 5 min.
I did have a Belt Drive Failure that first trip to the salt... it was due to
an old Belt drive that didn't have a left hand thread bolt.... Just thought
I would throw that one in there.....
Keith
----- Original Message -----
From: <Want1937hd@aol.com>
To: <fosterap@flash.net>; <land-speed@autox.team.net>
Sent: Tuesday, March 06, 2001 9:54 PM
Subject: Re: Timing chains
> In a message dated 3/6/01 10:13:38 PM Eastern Standard Time,
> fosterap@flash.net writes:
>
> << ISKY used to offer a reverse rotation cam for the small block Chevy,
and it
> used a 2 gear dirve just like a Chevy Six. Wonder if they still have
that?
> Jerry in Dallas. >>
> ...............Was that for boat use? Bob in Connecticut
>
> ///> ///
///
/// land-speed@autox.team.net mailing list
///
|