land-speed
[Top] [All Lists]

Re: Lincoln SP 125 Welder

To: "Dick J" <lsr_man@yahoo.com>, "Ferguson, Darrell"
Subject: Re: Lincoln SP 125 Welder
From: "Keith Turk" <kturk@ala.net>
Date: Mon, 6 Nov 2000 15:38:44 -0600
Kinda an interesting choice in Welders... Brad has one and I have the Sp100
both are great little welders... and I did a test Aluminum welding session
with Lincoln with a .045 liner and a .032 aluminum wire set up for the
Sp125 .... it uses Argon as it's primary shielding gas.... instead of the
Argon Co2 mix.
it was actually pretty easy to do.... but ...you really neat a spool gun to
do this correctly... but the wire feed like they were showing me worked
without one..

I am with George on this one... I would tig the Aluminum rather then use
the Mig....  For Steel the 125 will do about everything you would ever need
to do on a race car... I really like mine... 

Keith ( geez feeling lonely... Joe is the only one who beat me up all
day...NO this isn't an open invitation trust me... )

----------
> From: Dick J <lsr_man@yahoo.com>
> To: Ferguson, Darrell <dfergus@bactc.com>; 'dferguso@ebmail.gdeb.com';
land-speed@autox.team.net
> Subject: Lincoln SP 125 Welder
> Date: Monday, November 06, 2000 3:18 PM
> 
> Nope, you haven't gotten caught in a "time warp",
> I've just been reading through my "folders" in
> order to move on to my next stage of Land Speed
> Racing.  I had this filed away as the "next
> welder I'm getting".  
> What do you have to do when changing from welding
> steel to welding aluminum, just change the wire
> and amaperage settings?
> 
> Dick J
> 
> 
> --- "Ferguson, Darrell" <dfergus@bactc.com>
> wrote:
> > It's actually a Lincoln SP 125 plus. It rocks !
> > I've put plenty of wire
> > through it, built the entire chassis with it,
> > and no complaints. My
> > recommendations for setting up the unit would
> > be to get a large bottle of
> > your 75/25 mix (CO2-Argon a.k.a. Stargon,
> > Stargold, Goldgas..) Get a good
> > flow meter (not the BS little regulator they
> > recommend for it) and use 10
> > lb. spools of wire. When you set the welder up,
> > make sure it's on a good
> > circuit that has at least 10 gauge wire running
> > from your breaker panel to
> > the outlet, preferably a dedicated circuit just
> > for the welder. Don't use an
> > extension cord if humanly possible, if you do,
> > use the largest gauge
> > extension you can find. Believe it or not, the
> > current capabilities of your
> > home or shop electrical system dramatically
> > effect the quality of your
> > welds. For pretty much anything you'll ever
> > weld on a race car, from
> > sheetmetal to rollcage tubing, this little guy
> > smokes every other compact
> > mig I've ever used. As to flux core machines, I
> > wouldn't trust my life to a
> > weld from one of those units. Visually the
> > welds look OK from the fluxcore
> > unit, but when the Mig is dialed in, you'll
> > have a tough time telling some
> > of the Mig welds on my chassis from Heliarc.
> > 
> >     Darrell ferguson
> >     BLACK RADON ENGINEERING
> >     # 939 BBFALT
> >     http://my.cybersoup.com/blackradon
> > 
> > 
> > > -----Original Message-----
> > > From:     dferguso@ebmail.gdeb.com
> > [SMTP:dferguso@ebmail.gdeb.com]
> > > Sent:     Friday, October 08, 1999 8:54 AM
> > > To:       land-speed@autox.team.net
> > > Subject:  Welding and Welders
> > > 
> > > hey dick j - i would recommend a lincoln mini
> > mig (sp - 130) i think, it
> > > should handle 1/4 plate no problem. my
> > brother darrell has a lincoln
> > > sp-100
> > > i think, but it could use a little more power
> > once in a great while- maybe
> > > he will speak up on the forum, but i would
> > highly suggest getting a welder
> > > that is NOT flux cored, and it must have
> > infinite heat range control and
> > > infinite wire speed control if you want tasty
> > welds (infinite meaning not
> > > a
> > > stepped switch control, rather a smooth-
> > wherever-you-want-it control).
> > > darrell and i have poured literally hundreds
> > of pounds of wire thru his
> > > unit, and i would highly recommend it , its
> > got alot of "balls" for its
> > > portable size and works GREAT - doug @ black
> > radon
> > > 
> > 
> 
> 
> =====
> * * * * * * * * * * * * * *
> *         Dick J          * 
> *    (In East Texas)      *
> *         # 729           *
> * C/GRS   C/FRS    D/STR  *
> * * * * * * * * * * * * * *
> 
> __________________________________________________
> http://shopping.yahoo.com/

<Prev in Thread] Current Thread [Next in Thread>