Chevy or not, I still have a roadster to build.
Has anybody every machined (surface ground) the
top off of a stock cast iron manifold until all
of the runners were opened in order to weld on a
plate or plenum to create a blower manifold?
There is virtually nothing except a three deuce
set-up available for that old Dodge 241 any more,
and I would really like to put a blower on it. I
know I could rig up a centrifugal with a newer
two barrel without too much trouble, but that
motor really wants to have a jimmy on top of it!
I'm not sure I'm up to fabing a sheet metal
intake, but I guess I could buy a mig and it
could be a good "welding class project" for me.
Any ideas?
Thanks
=====
* * * * * * * * * * * * * *
* Dick J *
* (In East Texas) *
* # 729 *
* C/GRS C/FRS D/STR *
* * * * * * * * * * * * * *
__________________________________________________
http://shopping.yahoo.com/
|