Dick,
We used to arc weld a lot of exhaust manifolds with using stainless
steel rod, but I don't know what the current tricks are. I have not had
much faith in the new glue technologies, but I'm sure there are some
products now that replaces welding. My dentist even glues broken teeth.
Tom, Redding CA - #216 D/CC
Dick J wrote:
> Some of you guys are going to laugh at this,
> BUT:........
> (the only dumb questions are the unasked ones)
>
> What is the "current technology" on welding cast
> iron? It used to be that you could heat it up in
> an old oven (or your wife's kitchen oven), braze
> it with brass rod, then cool it down slowly in
> the oven. What's the hot lick now? I'm thinking
> in terms of some OEM intake manifold modification.
>
> =====
> .............................
> ..........Dick J.............
> ......(In East Texas)........
> ..........# 729..............
> ........Roadsters............
> .Hemis and Flatheads Forever.
> .............................
>
> __________________________________________________
> Yahoo! Photos -- now, 100 FREE prints!
> http://photos.yahoo.com
|