Be sure and report your solution to protecting
the line as itpasses the flywheel. Doesn't
running the line outside the frame rails suffice
for that?
Dick J
--- Keith Turk <kturk@ala.net> wrote:
> Well we actually stuck the bottle in the
> Passenger compartment yesterday...
>
> After Much Consideration there simply wasn't
> any place else to put this
> Monster.... and this is the 15lb bottle.... I
> really wanted the 20 but now
> that I see just how big this thing really
> is.... Hmmm
>
> There are a couple of Safety issues still to
> deal with like Protecting the
> line as it passes the Bell Housing and building
> a Box to cover the Bottle...
> My Understanding is that the bottle must be
> covered... There is No
> limitation on what kind of material covers the
> bottle So I am going to use
> some .080 aluminum sheet metal I have....
> Wondering if I can put a
> Plexiglass window in it to see the bottle
> Pressure gage from the Drivers
> seat.
>
> The Box itself basically is going To have to
> Permanent Ends with a
> removeable cover that Duez fasteners on...
> Nothing real fancy Just a Cover
> ....
>
> Course My Drag Racing buddies think I am
> NUTS.... They can't understand this
> Rule at ALL.... and with my limited knowledge I
> can't explain it to them any
> better.
>
> Keith ( why Yes I am still Clueless as to why I
> am covering a bottle that
> they mount in the open )
>
__________________________________________________
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com
|