Thought I would forward this back to the list in case someone else
could use the info. They have a web site @
http://www.bhjinc.com/index.html
BillB
----- Original Message -----
From: <OHFASTONE@aol.com>
To: <benettw@bellsouth.net>
Sent: Sunday, March 19, 2000 11:42 PM
Subject: Re: Dampner?
> Bill,
> I'm not sure but I think BHJ Products in Newark, Ca will custom make
a Damper
> for you. I can get their number if you would like, but like I said,
I'm not
> absolutely sure.
> Mike in L.A.
>
> In a message dated 3/19/0 8:34:17 PM, you wrote:
>
> <<I agree with running a dampner. What little if any loss in power
would
> be saved in less parts damage. But my question is what do you do in
a
> case like mine? I am building a 2.8 L 60 degree V6 and there is no
> aftermarket source for a dampner other than the OEM. I am not so
sure
> if the factory dampner would hold up very well past 6grand. I am not
> too keen on using the factory one and hoping it stays together.
Their
> will be too many other custom engine parts to worry about destroying
> if the dampner comes apart at 7 grand.
>
> BillB>>
>
>
|