Hereâ??s what I would do. I would coat both sides of the gasket with red
hi-temp RTV. I would not be concerned about which way the gasket is oriented.
Re-tighten the bolts after a few heat cycles.
Richard Mayor
boyracer466@gmail.com
> On Mar 4, 2022, at 9:04 PM, Bob Spidell <bspidell@comcast.net> wrote:
>
> Those look like good quality; the last few I've purchased from you-know-who
> have been perforated 'tin' on both sides with some black stuff that looks
> like cardboard sandwiched between.
>
> On 3/4/2022 7:28 PM, Alan Seigrist wrote:
>> All -
>>
>> I decided to put the steel side up since the gas flows from there and
>> figured the hot gasses would not eat away at the lip to the copper side if
>> it is facing down. These are decent payen gaskets i got from AH spares,
>>
>> Best,
>>
>> Alan
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|