--===============7607750828745420448==
Content-Transfer-Encoding: 7bit
--Apple-Mail-FA3187AA-F986-421A-9F8E-A97FBC2576F1
charset=utf-8
Content-Transfer-Encoding: quoted-printable
When I did my restoration 9 years ago on my 67 BJ-8 I replaced all my brake=
lines with SS lines . 2 new rear wheel cylinders . Had the front calipers r=
ebuilt along with my brake booster . Everything on the Hydraulic system eith=
er new or rebuilt.=20
Then I filled it up with silicone brake fluid. Then I moved to Fl. Around 3,=
000 miles later , no problems no sponginess in the brake pedal. Or clutch pe=
dal. I would do it again on another complete rebuild, if that ever happened =F0=
=9F=99=84 .=20
Don=20
Sent from my iPhone
> On Jul 25, 2021, at 6:57 AM, Tom Felts via Healeys <healeys@autox.team.net=
> wrote:
>=20
> =EF=BB=BF
> ditto
>=20
>=20
> ----- Original Message -----
> From: george mcharris via Healeys <healeys@autox.team.net>
> To: healeys@autox.team.net
> Sent: Sat, 24 Jul 2021 21:47:20 -0400 (EDT)
> Subject: Re: [Healeys] Which brake fluid
>=20
>=20
> I have used silicone for years without any problems....added plus it does=
not attack paint..an accidental drop can wreck on a nice paint job. Have se=
en comments that silicone gives a spongey feel, but not that I noticed.
>=20
>=20
> From: Healeys <healeys-bounces@autox.team.net> on behalf of healeys-reques=
t@autox.team.net <healeys-request@autox.team.net>
> Sent: Saturday, July 24, 2021 11:00 AM
> To: healeys@autox.team.net <healeys@autox.team.net>
> Subject: Healeys Digest, Vol 14, Issue 268
> =20
> Send Healeys mailing list submissions to
>=20
> healeys@autox.team.net
>=20
>=20
> To subscribe or unsubscribe via the World Wide Web, visit
>=20
> http://autox.team.net/mailman/listinfo/healeys
>=20
> or, via email, send a message with subject or body 'help' to
>=20
> healeys-request@autox.team.net
>=20
>=20
> You can reach the person managing the list at
>=20
> healeys-owner@autox.team.net
>=20
>=20
> When replying, please edit your Subject line so it is more specific
>=20
> than "Re: Contents of Healeys digest..."
>=20
>=20
>=20
> Today's Topics:
>=20
>=20
> 1. Which Brake Fluid? (Michael MacLean)
>=20
> 2. Re: Which Brake Fluid? (Kees Oudesluijs)
>=20
> 3. Re: Which Brake Fluid? (Kees Oudesluijs)
>=20
> 4. Re: Which Brake Fluid? (Michael Salter)
>=20
> 5. Re: Which Brake Fluid? (Steven Kingsbury)
>=20
> 6. Healey Sighting (Bob Spidell)
>=20
> 7. Re: Which Brake Fluid? (Tom Felts)
>=20
> 8. Re: Which Brake Fluid? (warthodson@aol.com)
>=20
> 9. Re: Which Brake Fluid? (Michael Oritt)
>=20
> 10. Re: Which Brake Fluid? (Kees Oudesluijs)
>=20
> 11. Re: Which Brake Fluid? (warthodson@aol.com)
>=20
> 12. Re: Which Brake Fluid? (Michael Oritt)
>=20
>=20
>=20
> ----------------------------------------------------------------------
>=20
>=20
> Message: 1
>=20
> Date: Fri, 23 Jul 2021 14:03:58 -0700
>=20
> From: Michael MacLean <springer.mike51@gmail.com>
>=20
> To: Ahealey help <healeys@autox.team.net>
>=20
> Subject: [Healeys] Which Brake Fluid?
>=20
> Message-ID:
>=20
> <CAL4ZEONGjf41c0rSmzX+nTVPHgBAOV=3DRjCjRUwkXLOzQtqWqGQ@mail.gmail.=
com>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> The BN2 is at the point where it is time to fill and bleed the new brake
>=20
> system. Now comes the time to decide whether to go with DOT 3/4 brake
>=20
> fluid or try silicone. Any recommendations, advice or warnings on this
>=20
> decision?
>=20
> Mike MacLean
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210723/1f5962f=
7/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 2
>=20
> Date: Fri, 23 Jul 2021 23:35:23 +0200 (CEST)
>=20
> From: Kees Oudesluijs <coudesluijs@upcmail.nl>
>=20
> To: Michael MacLean <springer.mike51@gmail.com>, Michael MacLean via
>=20
> Healeys <healeys@autox.team.net>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID: <847290308.312336.1627076123765@mail.ziggo.nl>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> DOT4. If you want to try silicon you would have to rebuild your entire hyd=
raulic circuit and fit all new rubber components. It may sometimes work with=
out a rebuild or it may fail as DOT4 and DOT5 (silicon) are not compatible a=
nd do not mix.
>=20
>=20
> What your life (and others) worth??
>=20
>=20
> Kees Oudesluijs
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210723/e0b0c87=
0/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 3
>=20
> Date: Fri, 23 Jul 2021 23:44:24 +0200 (CEST)
>=20
> From: Kees Oudesluijs <coudesluijs@upcmail.nl>
>=20
> To: Michael MacLean <springer.mike51@gmail.com>, Michael MacLean via
>=20
> Healeys <healeys@autox.team.net>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID: <1867776020.312388.1627076664916@mail.ziggo.nl>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> Sorry, did not read the question properly.
>=20
>=20
> In a new system you have the choice obviously.
>=20
>=20
> I would go for DOT4, which absorbs water, and change that every two years.=
That will get rid of any moisture getting into your system before it can do=
any harm. It also forces you to check the system when you replace the fluid=
. It is cheap and available anywhere.
>=20
>=20
> The problem with silicon brake fluid is that it does not absorb water. Wat=
er will always enter the system because of condensation in the brake fluid r=
eservoir. This moisture can than settle in the lower parts of the system and=
cause havoc unnoticed until it
> leaks.
>=20
>=20
>=20
> Kees Oudesluijs
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210723/4df0bcd=
c/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 4
>=20
> Date: Fri, 23 Jul 2021 17:52:37 -0400
>=20
> From: Michael Salter <michaelsalter@gmail.com>
>=20
> To: Kees Oudesluijs <coudesluijs@upcmail.nl>
>=20
> Cc: Michael MacLean <springer.mike51@gmail.com>, Michael MacLean via
>=20
> Healeys <healeys@autox.team.net>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID:
>=20
> <CAB3i7L+fj0-n9ms+P4=3DCoe=3DQFUdHyPEMyiwk75sdq64gkWPrSA@mail.gmai=
l.com>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> In this instance I agree with Kees.
>=20
> The decision comes down to personal preference IMHO.
>=20
>=20
> M
>=20
>=20
> On Fri., Jul. 23, 2021, 5:48 p.m. Kees Oudesluijs via Healeys, <
>=20
> healeys@autox.team.net> wrote:
>=20
>=20
> > Sorry, did not read the question properly.
>=20
> >
>=20
> > In a new system you have the choice obviously.
>=20
> >
>=20
> > I would go for DOT4, which absorbs water, and change that every two year=
s.
>=20
> > That will get rid of any moisture getting into your system before it can=
do
>=20
> > any harm. It also forces you to check the system when you replace the
>=20
> > fluid. It is cheap and available anywhere.
>=20
> >
>=20
> > The problem with silicon brake fluid is that it does not absorb water.
>=20
> > Water will always enter the system because of condensation in the brake
>=20
> > fluid reservoir. This moisture can than settle in the lower parts of the=
>=20
> > system and cause havoc unnoticed until it leaks.
>=20
> >
>=20
> >
>=20
> > Kees Oudesluijs
>=20
> > _______________________________________________
>=20
> > Support Team.Net http://www.team.net/donate.html
>=20
> > Suggested annual donation $12.75
>=20
> >
>=20
> > Archive: http://www.team.net/pipermail/healeys
>=20
> > http://autox.team.net/archive
>=20
> >
>=20
> > Healeys@autox.team.net
>=20
> > http://autox.team.net/mailman/listinfo/healeys
>=20
> >
>=20
> > Unsubscribe/Manage:
>=20
> >=20
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>=20
> >
>=20
> >
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210723/166420d=
d/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 5
>=20
> Date: Fri, 23 Jul 2021 23:29:48 -0000
>=20
> From: Steven Kingsbury <airtightproductions@icloud.com>
>=20
> To: Michael MacLean <springer.mike51@gmail.com>
>=20
> Cc: "healeys@autox.team.net" <healeys@autox.team.net>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID: <a28a63a4-2605-4547-96f5-9e12fa066efe@me.com>
>=20
> Content-Type: text/plain; charset=3D"utf-8"; Format=3D"flowed"
>=20
>=20
> I'm with everyone else I've read so far; DOT 4. Simple and it works.
>=20
> Steven Kingsbury
>=20
> BN1
>=20
>=20
> On July 23, 2021 at 2:05 PM, Michael MacLean via Healeys <healeys@autox.te=
am.net> wrote:
>=20
>=20
>=20
> The BN2 is at the point where it is time to fill and bleed the new brake s=
ystem.? Now comes the time to decide whether to go with DOT 3/4 brake fluid o=
r try silicone.? Any recommendations,? advice or warnings on this decision?
>=20
> Mike MacLean
>=20
> _______________________________________________
>=20
> Support Team.Net http://www.team.net/donate.html
>=20
> Suggested annual donation $12.75
>=20
>=20
> Archive: http://www.team.net/pipermail/healeyshttp://autox.team.net/archiv=
e
>=20
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
>=20
> Unsubscribe/Manage:=20
> http://autox.team.net/mailman/options/healeys/airtightproductions@icloud.c=
om
>=20
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210723/fa79510=
b/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 6
>=20
> Date: Fri, 23 Jul 2021 20:26:15 -0700
>=20
> From: Bob Spidell <bspidell@comcast.net>
>=20
> To: Healeys <healeys@autox.team.net>
>=20
> Subject: [Healeys] Healey Sighting
>=20
> Message-ID: <c2ed5095-f375-2468-ac4f-d58cf6265e6c@comcast.net>
>=20
> Content-Type: text/plain; charset=3D"utf-8"; Format=3D"flowed"
>=20
>=20
> I think they're listening to Apollo 11 on the radio.
>=20
>=20
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210723/3af0285=
5/attachment-0001.htm>
>=20
> -------------- next part --------------
>=20
> A non-text attachment was scrubbed...
>=20
> Name: IMG_0746.JPG
>=20
> Type: image/jpeg
>=20
> Size: 565600 bytes
>=20
> Desc: not available
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210723/3af0285=
5/attachment-0001.jpe>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 7
>=20
> Date: Sat, 24 Jul 2021 05:28:56 -0400 (EDT)
>=20
> From: Tom Felts <tomfelts@windstream.net>
>=20
> To: Steven Kingsbury <airtightproductions@icloud.com>
>=20
> Cc: Michael MacLean <springer.mike51@gmail.com>,
>=20
> healeys@autox.team.net
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID:
>=20
> <2133467853.110536294.1627118936470.JavaMail.zimbra@windstream.net=
>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> I have been using DOT 5 in my BJ8 for years. Works fine for me.
>=20
> ----- Original Message -----
>=20
> From: Steven Kingsbury via Healeys <healeys@autox.team.net>
>=20
> To: Michael MacLean <springer.mike51@gmail.com>
>=20
> Cc: healeys@autox.team.net
>=20
> Sent: Fri, 23 Jul 2021 19:29:48 -0400 (EDT)
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
>=20
> I'm with everyone else I've read so far; DOT 4. Simple and it works.Steven=
KingsburyBN1
>=20
> On July 23, 2021 at 2:05 PM, Michael MacLean via Healeys <healeys@autox.te=
am.net> wrote:
>=20
>=20
> The BN2 is at the point where it is time to fill and bleed the new brake s=
ystem. Now comes the time to decide whether to go with DOT 3/4 brake fluid o=
r try silicone. Any recommendations, advice or warnings on this decision?M=
ike MacLean_______________________________________________
>=20
> Support Team.Nethttp://www.team.net/donate.html
>=20
> Suggested annual donation $12.75
>=20
>=20
> Archive:=20
> http://www.team.net/pipermail/healeyshttp://autox.team.net/archive
>=20
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
>=20
> Unsubscribe/Manage:=20
> http://autox.team.net/mailman/options/healeys/airtightproductions@icloud.c=
om
>=20
>=20
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210724/8f1eb5a=
7/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 8
>=20
> Date: Sat, 24 Jul 2021 13:03:25 +0000 (UTC)
>=20
> From: warthodson@aol.com
>=20
> To: "healeys@autox.team.net" <healeys@autox.team.net>,
>=20
> "springer.mike51@gmail.com" <springer.mike51@gmail.com>
>=20
> Cc: "healeys@autox.team.net" <healeys@autox.team.net>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID: <1485251345.715106.1627131805514@mail.yahoo.com>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> I would like to say a few words on behalf of silicone brake fluid.It is no=
n-hygroscopic (does not absorb moisture).It does not damage paint as do glyc=
ol fluids.
>=20
> A newly rebuilt and scrupulously clean brake system filled with silicone f=
luid should outlast a system filled with glycol fluid by several times.
>=20
> The military specifies Silicone brake fluid for a reason.?
>=20
>=20
> Gary Hodson
>=20
>=20
>=20
>=20
> On July 23, 2021 at 2:05 PM, Michael MacLean via Healeys <healeys@autox.te=
am.net> wrote:
>=20
>=20
>=20
> The BN2 is at the point where it is time to fill and bleed the new brake s=
ystem.? Now comes the time to decide whether to go with DOT 3/4 brake fluid o=
r try silicone.? Any recommendations,? advice or warnings on this decision?M=
ike MacLean
>=20
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210724/1759f0f=
b/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 9
>=20
> Date: Sat, 24 Jul 2021 09:18:38 -0400
>=20
> From: Michael Oritt <michael.oritt@gmail.com>
>=20
> To: warthodson@aol.com
>=20
> Cc: "healeys@autox.team.net" <healeys@autox.team.net>,
>=20
> "springer.mike51@gmail.com" <springer.mike51@gmail.com>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID:
>=20
> <CAPTa0B4CdEdqt6orZf-ujz=3DDi5KjYAHKAekuhPFq1hfgDAFg=3Dw@mail.gmai=
l.com>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> "The military specifies Silicone brake fluid for a reason"
>=20
>=20
> Not necessarily a good one.
>=20
>=20
> Best--Michael Oritt
>=20
>=20
> On Sat, Jul 24, 2021 at 9:04 AM warthodson--- via Healeys <
>=20
> healeys@autox.team.net> wrote:
>=20
>=20
> > I would like to say a few words on behalf of silicone brake fluid.
>=20
> > It is non-hygroscopic (does not absorb moisture).
>=20
> > It does not damage paint as do glycol fluids.
>=20
> > A newly rebuilt and scrupulously clean brake system filled with silicone=
>=20
> > fluid should outlast a system filled with glycol fluid by several times.=
>=20
> > The military specifies Silicone brake fluid for a reason.
>=20
> >
>=20
> > Gary Hodson
>=20
> >
>=20
> >
>=20
> >
>=20
> > On July 23, 2021 at 2:05 PM, Michael MacLean via Healeys <
>=20
> > healeys@autox.team.net> wrote:
>=20
> >
>=20
> > The BN2 is at the point where it is time to fill and bleed the new brake=
>=20
> > system. Now comes the time to decide whether to go with DOT 3/4 brake
>=20
> > fluid or try silicone. Any recommendations, advice or warnings on this=
>=20
> > decision?
>=20
> > Mike MacLean
>=20
> >
>=20
> >
>=20
> > _______________________________________________
>=20
> > Support Team.Net http://www.team.net/donate.html
>=20
> > Suggested annual donation $12.75
>=20
> >
>=20
> > Archive: http://www.team.net/pipermail/healeys
>=20
> > http://autox.team.net/archive
>=20
> >
>=20
> > Healeys@autox.team.net
>=20
> > http://autox.team.net/mailman/listinfo/healeys
>=20
> >
>=20
> > Unsubscribe/Manage:
>=20
> >=20
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>=20
> >
>=20
> >
>=20
>=20
> --=20
>=20
> Best--Michael
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210724/a5900d5=
7/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 10
>=20
> Date: Sat, 24 Jul 2021 15:33:05 +0200 (CEST)
>=20
> From: Kees Oudesluijs <coudesluijs@upcmail.nl>
>=20
> To: Michael Oritt <michael.oritt@gmail.com>, Michael Oritt via Healeys
>=20
> <healeys@autox.team.net>, warthodson@aol.com
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID: <1204316342.319344.1627133585866@mail.ziggo.nl>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> Perhaps the military also specify corrosion proof/lined/SS hydraulic parts=
??
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210724/77423e2=
7/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 11
>=20
> Date: Sat, 24 Jul 2021 13:38:04 +0000 (UTC)
>=20
> From: warthodson@aol.com
>=20
> To: "michael.oritt@gmail.com" <michael.oritt@gmail.com>
>=20
> Cc: "healeys@autox.team.net" <healeys@autox.team.net>,
>=20
> "springer.mike51@gmail.com" <springer.mike51@gmail.com>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID: <731761970.726376.1627133884098@mail.yahoo.com>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> You really believe that?
>=20
>=20
> -----Original Message-----
>=20
> From: Michael Oritt <michael.oritt@gmail.com>
>=20
> To: warthodson@aol.com
>=20
> Cc: healeys@autox.team.net <healeys@autox.team.net>; springer.mike51@gmail=
.com <springer.mike51@gmail.com>
>=20
> Sent: Sat, Jul 24, 2021 8:18 am
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
>=20
> "The military specifies Silicone brake fluid for a reason"
>=20
> Not necessarily a good one.
>=20
> Best--Michael Oritt
>=20
> On Sat, Jul 24, 2021 at 9:04 AM warthodson--- via Healeys <healeys@autox.t=
eam.net> wrote:
>=20
>=20
> I would like to say a few words on behalf of silicone brake fluid.It is no=
n-hygroscopic (does not absorb moisture).It does not damage paint as do glyc=
ol fluids.
>=20
> A newly rebuilt and scrupulously clean brake system filled with silicone f=
luid should outlast a system filled with glycol fluid by several times.
>=20
> The military specifies Silicone brake fluid for a reason.?
>=20
>=20
> Gary Hodson
>=20
>=20
>=20
>=20
> On July 23, 2021 at 2:05 PM, Michael MacLean via Healeys <healeys@autox.te=
am.net> wrote:
>=20
>=20
>=20
> The BN2 is at the point where it is time to fill and bleed the new brake s=
ystem.? Now comes the time to decide whether to go with DOT 3/4 brake fluid o=
r try silicone.? Any recommendations,? advice or warnings on this decision?M=
ike MacLean
>=20
>=20
> _______________________________________________
>=20
> Support Team.Net http://www.team.net/donate.html
>=20
> Suggested annual donation? $12.75
>=20
>=20
> Archive: http://www.team.net/pipermail/healeyshttp://autox.team.net/archiv=
e
>=20
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
>=20
> Unsubscribe/Manage:=20
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>=20
>=20
>=20
>=20
>=20
> --=20
>=20
> Best--Michael
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210724/7b3edc2=
1/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Message: 12
>=20
> Date: Sat, 24 Jul 2021 09:38:53 -0400
>=20
> From: Michael Oritt <michael.oritt@gmail.com>
>=20
> To: Michael MacLean <springer.mike51@gmail.com>
>=20
> Cc: Ahealey help <healeys@autox.team.net>
>=20
> Subject: Re: [Healeys] Which Brake Fluid?
>=20
> Message-ID:
>=20
> <CAPTa0B5qLUzADh9=3DmaWD1w0mW6-+rRQN3W3OweoJ2B3CuakUYQ@mail.gmail.=
com>
>=20
> Content-Type: text/plain; charset=3D"utf-8"
>=20
>=20
> Michael--
>=20
>=20
> Both have pluses and minuses--I simply feel that DOT 3/4 has more of the
>=20
> former and fewer of the latter than does silicone, but that's just me.
>=20
>=20
> Best--Michael Oritt
>=20
>=20
> On Fri, Jul 23, 2021 at 5:04 PM Michael MacLean via Healeys <
>=20
> healeys@autox.team.net> wrote:
>=20
>=20
> > The BN2 is at the point where it is time to fill and bleed the new brake=
>=20
> > system. Now comes the time to decide whether to go with DOT 3/4 brake
>=20
> > fluid or try silicone. Any recommendations, advice or warnings on this=
>=20
> > decision?
>=20
> > Mike MacLean
>=20
> > _______________________________________________
>=20
> > Support Team.Net http://www.team.net/donate.html
>=20
> > Suggested annual donation $12.75
>=20
> >
>=20
> > Archive: http://www.team.net/pipermail/healeys
>=20
> > http://autox.team.net/archive
>=20
> >
>=20
> > Healeys@autox.team.net
>=20
> > http://autox.team.net/mailman/listinfo/healeys
>=20
> >
>=20
> > Unsubscribe/Manage:
>=20
> >=20
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>=20
> >
>=20
> >
>=20
>=20
> --=20
>=20
> Best--Michael
>=20
> -------------- next part --------------
>=20
> An HTML attachment was scrubbed...
>=20
> URL: <http://autox.team.net/pipermail/healeys/attachments/20210724/bef4729=
4/attachment-0001.htm>
>=20
>=20
> ------------------------------
>=20
>=20
> Subject: Digest Footer
>=20
>=20
> _______________________________________________
>=20
> Healeys mailing list
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
>=20
> archives: http://autox.team.net/archive
>=20
>=20
>=20
>=20
> ------------------------------
>=20
>=20
> End of Healeys Digest, Vol 14, Issue 268
>=20
> ****************************************
>=20
>=20
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>=20
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archi=
ve
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fsufan19=
52@yahoo.com
>=20
--Apple-Mail-FA3187AA-F986-421A-9F8E-A97FBC2576F1
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><meta http-equiv=3D"content-type" content=3D"text/html; charset=3D=
utf-8"></head><body dir=3D"auto">When I did my restoration 9 years ago on my=
67 BJ-8 I replaced all my brake lines with SS lines . 2 new rear whee=
l cylinders . Had the front calipers rebuilt along with my brake booster . E=
verything on the Hydraulic system either new or rebuilt. <div>Then I fi=
lled it up with silicone brake fluid. Then I moved to Fl. Around 3,000 miles=
later , no problems no sponginess in the brake pedal. Or clutch pedal. I wo=
uld do it again on another complete rebuild, if that ever happened =F0=9F=99=
=84 . </div><div> Don <br><br><di=
v dir=3D"ltr">Sent from my iPhone</div><div dir=3D"ltr"><br><blockquote type=
=3D"cite">On Jul 25, 2021, at 6:57 AM, Tom Felts via Healeys <healeys@aut=
ox.team.net> wrote:<br><br></blockquote></div><blockquote type=3D"cite"><=
div dir=3D"ltr">=EF=BB=BF<style> body {height: 100%; color:#000000; font-siz=
e:12pt; font-family:arial, helvetica, sans-serif;}</style><div>ditto</div><d=
iv><br data-mce-bogus=3D"1"></div><div><br></div><div>----- Original Message=
-----<br>From: george mcharris via Healeys <healeys@autox.team.net><b=
r>To: healeys@autox.team.net<br>Sent: Sat, 24 Jul 2021 21:47:20 -0400 (EDT)<=
br>Subject: Re: [Healeys] Which brake fluid<br></div><div><br></div><style s=
tyle=3D"display: none;" data-mce-style=3D"display: none;"> P {margin-top:0;m=
argin-bottom:0;} </style><div style=3D"font-family: Calibri, Helvetica, sans=
-serif; font-size: 12pt; color: #000000;" data-mce-style=3D"font-family: Cal=
ibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;"><br>I have us=
ed silicone for years without any problems....added plus it does not a=
ttack paint..an accidental drop can wreck on a nice paint job. Have seen com=
ments that silicone gives a spongey feel, but not that I noticed.</div><div>=
<div id=3D"appendonsend"><br></div><div style=3D"font-family: Calibri,Helvet=
ica,sans-serif; font-size: 12pt; color: #000000;" data-mce-style=3D"font-fam=
ily: Calibri,Helvetica,sans-serif; font-size: 12pt; color: #000000;"><br></d=
iv><hr style=3D"display: inline-block; width: 98%;" data-mce-style=3D"displa=
y: inline-block; width: 98%;"><div id=3D"divRplyFwdMsg" dir=3D"ltr"><span fa=
ce=3D"Calibri, sans-serif" color=3D"#000000" data-mce-style=3D"font-size: 11=
pt; color: #000000; font-family: Calibri, sans-serif;" style=3D"font-size: 1=
1pt; color: #000000; font-family: Calibri, sans-serif;"><b>From:</b> Healeys=
<healeys-bounces@autox.team.net> on behalf of healeys-request@autox.t=
eam.net <healeys-request@autox.team.net><br><b>Sent:</b> Saturday, Jul=
y 24, 2021 11:00 AM<br><b>To:</b> healeys@autox.team.net <healeys@autox.t=
eam.net><br><b>Subject:</b> Healeys Digest, Vol 14, Issue 268</span><div>=
</div></div><div class=3D"BodyFragment"><div class=3D"PlainText">Send H=
ealeys mailing list submissions to<br><div><br></div>  =
; healeys@autox.team.net<br><div><br></div><br>To subscrib=
e or unsubscribe via the World Wide Web, visit<br><div><br></div>  =
; <a href=3D"http://autox.team.net/mailman/lis=
tinfo/healeys" target=3D"_blank" data-mce-href=3D"http://autox.team.net/mail=
man/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a><br>=
<div><br></div>or, via email, send a message with subject or body 'help' to<=
br><div><br></div> healeys-request=
@autox.team.net<br><div><br></div><br>You can reach the person managing the l=
ist at<br><div><br></div> healeys-=
owner@autox.team.net<br><div><br></div><br>When replying, please edit your S=
ubject line so it is more specific<br><div><br></div>than "Re: Contents of H=
ealeys digest..."<br><div><br></div><br><div><br></div>Today's Topics:<br><d=
iv><br></div><br> 1. Which Brake Fluid? (Michael MacLean)<br><di=
v><br></div> 2. Re: Which Brake Fluid? (Kees Oudesluijs)<br><div=
><br></div> 3. Re: Which Brake Fluid? (Kees Oudesluijs)<br><div>=
<br></div> 4. Re: Which Brake Fluid? (Michael Salter)<br><div><b=
r></div> 5. Re: Which Brake Fluid? (Steven Kingsbury)<br><div><b=
r></div> 6. Healey Sighting (Bob Spidell)<br><div><br></div>&nbs=
p; 7. Re: Which Brake Fluid? (Tom Felts)<br><div><br></div>  =
; 8. Re: Which Brake Fluid? (warthodson@aol.com)<br><div><br></div> &nb=
sp; 9. Re: Which Brake Fluid? (Michael Oritt)<br><div><br></div> 10. R=
e: Which Brake Fluid? (Kees Oudesluijs)<br><div><br></div> 11. Re: Whi=
ch Brake Fluid? (warthodson@aol.com)<br><div><br></div> 12. Re: Which B=
rake Fluid? (Michael Oritt)<br><div><br></div><br><div><br></div>-----------=
-----------------------------------------------------------<br><div><br></di=
v><br>Message: 1<br><div><br></div>Date: Fri, 23 Jul 2021 14:03:58 -0700<br>=
<div><br></div>From: Michael MacLean <springer.mike51@gmail.com><br><d=
iv><br></div>To: Ahealey help <healeys@autox.team.net><br><div><br></d=
iv>Subject: [Healeys] Which Brake Fluid?<br><div><br></div>Message-ID:<br><d=
iv><br></div> <CAL4ZEONGjf41c0r=
SmzX+nTVPHgBAOV=3DRjCjRUwkXLOzQtqWqGQ@mail.gmail.com><br><div><br></div>C=
ontent-Type: text/plain; charset=3D"utf-8"<br><div><br></div><br>The BN2 is a=
t the point where it is time to fill and bleed the new brake<br><div><br></d=
iv>system. Now comes the time to decide whether to go with DOT 3/4 bra=
ke<br><div><br></div>fluid or try silicone. Any recommendations, =
advice or warnings on this<br><div><br></div>decision?<br><div><br></div>Mi=
ke MacLean<br><div><br></div>-------------- next part --------------<br><div=
><br></div>An HTML attachment was scrubbed...<br><div><br></div>URL: <<a h=
ref=3D"http://autox.team.net/pipermail/healeys/attachments/20210723/1f5962f7=
/attachment-0001.htm" target=3D"_blank" data-mce-href=3D"http://autox.team.n=
et/pipermail/healeys/attachments/20210723/1f5962f7/attachment-0001.htm">http=
://autox.team.net/pipermail/healeys/attachments/20210723/1f5962f7/attachment=
-0001.htm</a>><br><div><br></div><br>------------------------------<br><d=
iv><br></div><br>Message: 2<br><div><br></div>Date: Fri, 23 Jul 2021 23:35:2=
3 +0200 (CEST)<br><div><br></div>From: Kees Oudesluijs <coudesluijs@upcma=
il.nl><br><div><br></div>To: Michael MacLean <springer.mike51@gmail.co=
m>, Michael MacLean via<br><div><br></div> &=
nbsp; Healeys <healeys@autox.team.net><br><div><br></div>Subject=
: Re: [Healeys] Which Brake Fluid?<br><div><br></div>Message-ID: <8472903=
08.312336.1627076123765@mail.ziggo.nl><br><div><br></div>Content-Type: te=
xt/plain; charset=3D"utf-8"<br><div><br></div><br>DOT4. If you want to try s=
ilicon you would have to rebuild your entire hydraulic circuit and fit all n=
ew rubber components. It may sometimes work without a rebuild or it may fail=
as DOT4 and DOT5 (silicon) are not compatible and do not mix.<br><div><br><=
/div><br>What your life (and others) worth??<br><div><br></div><br>Kees Oude=
sluijs<br><div><br></div>-------------- next part --------------<br><div><br=
></div>An HTML attachment was scrubbed...<br><div><br></div>URL: <<a href=
=3D"http://autox.team.net/pipermail/healeys/attachments/20210723/e0b0c870/at=
tachment-0001.htm" target=3D"_blank" data-mce-href=3D"http://autox.team.net/=
pipermail/healeys/attachments/20210723/e0b0c870/attachment-0001.htm">http://=
autox.team.net/pipermail/healeys/attachments/20210723/e0b0c870/attachment-00=
01.htm</a>><br><div><br></div><br>------------------------------<br><div>=
<br></div><br>Message: 3<br><div><br></div>Date: Fri, 23 Jul 2021 23:44:24 +=
0200 (CEST)<br><div><br></div>From: Kees Oudesluijs <coudesluijs@upcmail.=
nl><br><div><br></div>To: Michael MacLean <springer.mike51@gmail.com&g=
t;, Michael MacLean via<br><div><br></div> &nbs=
p; Healeys <healeys@autox.team.net><br><div><br></div>Subject: R=
e: [Healeys] Which Brake Fluid?<br><div><br></div>Message-ID: <1867776020=
.312388.1627076664916@mail.ziggo.nl><br><div><br></div>Content-Type: text=
/plain; charset=3D"utf-8"<br><div><br></div><br>Sorry, did not read the ques=
tion properly.<br><div><br></div><br>In a new system you have the choice obv=
iously.<br><div><br></div><br>I would go for DOT4, which absorbs water, and c=
hange that every two years. That will get rid of any moisture getting into y=
our system before it can do any harm. It also forces you to check the system=
when you replace the fluid. It is cheap and available anywhere.<br><div><br=
></div><br>The problem with silicon brake fluid is that it does not absorb w=
ater. Water will always enter the system because of condensation in the brak=
e fluid reservoir. This moisture can than settle in the lower parts of the s=
ystem and cause havoc unnoticed until it<br> leaks.<br><div><br></div><br><d=
iv><br></div>Kees Oudesluijs<br><div><br></div>-------------- next part ----=
----------<br><div><br></div>An HTML attachment was scrubbed...<br><div><br>=
</div>URL: <<a href=3D"http://autox.team.net/pipermail/healeys/attachment=
s/20210723/4df0bcdc/attachment-0001.htm" target=3D"_blank" data-mce-href=3D"=
http://autox.team.net/pipermail/healeys/attachments/20210723/4df0bcdc/attach=
ment-0001.htm">http://autox.team.net/pipermail/healeys/attachments/20210723/=
4df0bcdc/attachment-0001.htm</a>><br><div><br></div><br>-----------------=
-------------<br><div><br></div><br>Message: 4<br><div><br></div>Date: Fri, 2=
3 Jul 2021 17:52:37 -0400<br><div><br></div>From: Michael Salter <michael=
salter@gmail.com><br><div><br></div>To: Kees Oudesluijs <coudesluijs@u=
pcmail.nl><br><div><br></div>Cc: Michael MacLean <springer.mike51@gmai=
l.com>, Michael MacLean via<br><div><br></div> &nb=
sp; Healeys <healeys@autox.team.net><br><div><br></d=
iv>Subject: Re: [Healeys] Which Brake Fluid?<br><div><br></div>Message-ID:<b=
r><div><br></div> <CAB3i7L+fj0-=
n9ms+P4=3DCoe=3DQFUdHyPEMyiwk75sdq64gkWPrSA@mail.gmail.com><br><div><br><=
/div>Content-Type: text/plain; charset=3D"utf-8"<br><div><br></div><br>In th=
is instance I agree with Kees.<br><div><br></div>The decision comes do=
wn to personal preference IMHO.<br><div><br></div><br>M<br><div><br></div><b=
r>On Fri., Jul. 23, 2021, 5:48 p.m. Kees Oudesluijs via Healeys, <<br><di=
v><br></div>healeys@autox.team.net> wrote:<br><div><br></div><br>> Sor=
ry, did not read the question properly.<br><div><br></div>><br><div><br><=
/div>> In a new system you have the choice obviously.<br><div><br></div>&=
gt;<br><div><br></div>> I would go for DOT4, which absorbs water, and cha=
nge that every two years.<br><div><br></div>> That will get rid of any mo=
isture getting into your system before it can do<br><div><br></div>> any h=
arm. It also forces you to check the system when you replace the<br><div><br=
></div>> fluid. It is cheap and available anywhere.<br><div><br></div>>=
;<br><div><br></div>> The problem with silicon brake fluid is that it doe=
s not absorb water.<br><div><br></div>> Water will always enter the syste=
m because of condensation in the brake<br><div><br></div>> fluid reservoi=
r. This moisture can than settle in the lower parts of the<br><div><br></div=
>> system and cause havoc unnoticed until it leaks.<br><div><br></div>>=
;<br><div><br></div>><br><div><br></div>> Kees Oudesluijs<br><div><br>=
</div>> _______________________________________________<br><div><br></div=
>> Support Team.Net <a href=3D"http://www.team.net/donate.html" target=3D=
"_blank" data-mce-href=3D"http://www.team.net/donate.html">http://www.team.n=
et/donate.html</a><br><div><br></div>> Suggested annual donation $1=
2.75<br><div><br></div>><br><div><br></div>> Archive: <a href=3D"http:=
//www.team.net/pipermail/healeys" target=3D"_blank" data-mce-href=3D"http://=
www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a><br=
><div><br></div>> <a href=3D"http://autox.team.net/archive" target=3D"_bl=
ank" data-mce-href=3D"http://autox.team.net/archive">http://autox.team.net/a=
rchive</a><br><div><br></div>><br><div><br></div>> Healeys@autox.team.=
net<br><div><br></div>> <a href=3D"http://autox.team.net/mailman/listinfo=
/healeys" target=3D"_blank" data-mce-href=3D"http://autox.team.net/mailman/l=
istinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a><br><div>=
<br></div>><br><div><br></div>> Unsubscribe/Manage:<br><div><br></div>=
> <a href=3D"http://autox.team.net/mailman/options/healeys/michaelsalter@=
gmail.com" target=3D"_blank" data-mce-href=3D"http://autox.team.net/mailman/=
options/healeys/michaelsalter@gmail.com"><br>http://autox.team.net/mailman/o=
ptions/healeys/michaelsalter@gmail.com</a><br><div><br></div>><br><div><b=
r></div>><br><div><br></div>-------------- next part --------------<br><d=
iv><br></div>An HTML attachment was scrubbed...<br><div><br></div>URL: <<=
a href=3D"http://autox.team.net/pipermail/healeys/attachments/20210723/16642=
0dd/attachment-0001.htm" target=3D"_blank" data-mce-href=3D"http://autox.tea=
m.net/pipermail/healeys/attachments/20210723/166420dd/attachment-0001.htm">h=
ttp://autox.team.net/pipermail/healeys/attachments/20210723/166420dd/attachm=
ent-0001.htm</a>><br><div><br></div><br>------------------------------<br=
><div><br></div><br>Message: 5<br><div><br></div>Date: Fri, 23 Jul 2021 23:2=
9:48 -0000<br><div><br></div>From: Steven Kingsbury <airtightproductions@=
icloud.com><br><div><br></div>To: Michael MacLean <springer.mike51@gma=
il.com><br><div><br></div>Cc: "healeys@autox.team.net" <healeys@autox.=
team.net><br><div><br></div>Subject: Re: [Healeys] Which Brake Fluid?<br>=
<div><br></div>Message-ID: <a28a63a4-2605-4547-96f5-9e12fa066efe@me.com&g=
t;<br><div><br></div>Content-Type: text/plain; charset=3D"utf-8"; Format=3D"=
flowed"<br><div><br></div><br>I'm with everyone else I've read so far; DOT 4=
. Simple and it works.<br><div><br></div>Steven Kingsbury<br><div><br></div>=
BN1<br><div><br></div><br>On July 23, 2021 at 2:05 PM, Michael MacLean via H=
ealeys <healeys@autox.team.net> wrote:<br><div><br></div><br><div><br>=
</div>The BN2 is at the point where it is time to fill and bleed the new bra=
ke system.? Now comes the time to decide whether to go with DOT 3/4 brake fl=
uid or try silicone.? Any recommendations,? advice or warnings on this decis=
ion?<br><div><br></div>Mike MacLean<br><div><br></div>______________________=
_________________________<br><div><br></div>Support Team.Net <a href=3D"http=
://www.team.net/donate.html" target=3D"_blank" data-mce-href=3D"http://www.t=
eam.net/donate.html">http://www.team.net/donate.html</a><br><div><br></div>S=
uggested annual donation $12.75<br><div><br></div><br>Archive: <a href=3D"ht=
tp://www.team.net/pipermail/healeys" target=3D"_blank" data-mce-href=3D"http=
://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a>=
<a href=3D"http://autox.team.net/archive" target=3D"_blank" data-mce-href=3D=
"http://autox.team.net/archive">http://autox.team.net/archive</a><br><div><b=
r></div><br>Healeys@autox.team.net<br><a href=3D"http://autox.team.net/mailm=
an/listinfo/healeys" target=3D"_blank" data-mce-href=3D"http://autox.team.ne=
t/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</=
a><br><div><br></div><br>Unsubscribe/Manage: <a href=3D"http://autox.team.ne=
t/mailman/options/healeys/airtightproductions@icloud.com" target=3D"_blank" d=
ata-mce-href=3D"http://autox.team.net/mailman/options/healeys/airtightproduc=
tions@icloud.com"><br>http://autox.team.net/mailman/options/healeys/airtight=
productions@icloud.com</a><br><div><br></div><br>-------------- next part --=
------------<br><div><br></div>An HTML attachment was scrubbed...<br><div><b=
r></div>URL: <<a href=3D"http://autox.team.net/pipermail/healeys/attachme=
nts/20210723/fa79510b/attachment-0001.htm" target=3D"_blank" data-mce-href=3D=
"http://autox.team.net/pipermail/healeys/attachments/20210723/fa79510b/attac=
hment-0001.htm">http://autox.team.net/pipermail/healeys/attachments/20210723=
/fa79510b/attachment-0001.htm</a>><br><div><br></div><br>----------------=
--------------<br><div><br></div><br>Message: 6<br><div><br></div>Date: Fri,=
23 Jul 2021 20:26:15 -0700<br><div><br></div>From: Bob Spidell <bspidell=
@comcast.net><br><div><br></div>To: Healeys <healeys@autox.team.net>=
;<br><div><br></div>Subject: [Healeys] Healey Sighting<br><div><br></div>Mes=
sage-ID: <c2ed5095-f375-2468-ac4f-d58cf6265e6c@comcast.net><br><div><b=
r></div>Content-Type: text/plain; charset=3D"utf-8"; Format=3D"flowed"<br><d=
iv><br></div><br>I think they're listening to Apollo 11 on the radio.<br><di=
v><br></div><br><div><br></div>-------------- next part --------------<br><d=
iv><br></div>An HTML attachment was scrubbed...<br><div><br></div>URL: <<=
a href=3D"http://autox.team.net/pipermail/healeys/attachments/20210723/3af02=
855/attachment-0001.htm" target=3D"_blank" data-mce-href=3D"http://autox.tea=
m.net/pipermail/healeys/attachments/20210723/3af02855/attachment-0001.htm">h=
ttp://autox.team.net/pipermail/healeys/attachments/20210723/3af02855/attachm=
ent-0001.htm</a>><br><div><br></div>-------------- next part ------------=
--<br><div><br></div>A non-text attachment was scrubbed...<br><div><br></div=
>Name: IMG_0746.JPG<br><div><br></div>Type: image/jpeg<br><div><br></div>Siz=
e: 565600 bytes<br><div><br></div>Desc: not available<br><div><br></div>URL:=
<<a href=3D"http://autox.team.net/pipermail/healeys/attachments/20210723=
/3af02855/attachment-0001.jpe" target=3D"_blank" data-mce-href=3D"http://aut=
ox.team.net/pipermail/healeys/attachments/20210723/3af02855/attachment-0001.=
jpe">http://autox.team.net/pipermail/healeys/attachments/20210723/3af02855/a=
ttachment-0001.jpe</a>><br><div><br></div><br>---------------------------=
---<br><div><br></div><br>Message: 7<br><div><br></div>Date: Sat, 24 Jul 202=
1 05:28:56 -0400 (EDT)<br><div><br></div>From: Tom Felts <tomfelts@windst=
ream.net><br><div><br></div>To: Steven Kingsbury <airtightproductions@=
icloud.com><br><div><br></div>Cc: Michael MacLean <springer.mike51@gma=
il.com>,<br><div><br></div> hea=
leys@autox.team.net<br><div><br></div>Subject: Re: [Healeys] Which Brake Flu=
id?<br><div><br></div>Message-ID:<br><div><br></div> =
<2133467853.110536294.1627118936470.JavaMail.zimbra@wi=
ndstream.net><br><div><br></div>Content-Type: text/plain; charset=3D"utf-=
8"<br><div><br></div><br>I have been using DOT 5 in my BJ8 for years. W=
orks fine for me.<br><div><br></div>----- Original Message -----<br><div><br=
></div>From: Steven Kingsbury via Healeys <healeys@autox.team.net><br>=
<div><br></div>To: Michael MacLean <springer.mike51@gmail.com><br><div=
><br></div>Cc: healeys@autox.team.net<br><div><br></div>Sent: Fri, 23 Jul 20=
21 19:29:48 -0400 (EDT)<br><div><br></div>Subject: Re: [Healeys] Which Brake=
Fluid?<br><div><br></div><br>I'm with everyone else I've read so far; DOT 4=
. Simple and it works.Steven KingsburyBN1<br><div><br></div>On July 23, 2021=
at 2:05 PM, Michael MacLean via Healeys <healeys@autox.team.net> wrot=
e:<br><div><br></div><br>The BN2 is at the point where it is time to fill an=
d bleed the new brake system. Now comes the time to decide whether to g=
o with DOT 3/4 brake fluid or try silicone. Any recommendations, =
advice or warnings on this decision?Mike MacLean___________________________=
____________________<br><div><br></div>Support Team.Nethttp://www.team.net/d=
onate.html<br><div><br></div>Suggested annual donation $12.75<br><div><br></=
div><br>Archive: <a href=3D"http://www.team.net/pipermail/healeyshttp://auto=
x.team.net/archive" target=3D"_blank" data-mce-href=3D"http://www.team.net/p=
ipermail/healeyshttp://autox.team.net/archive"><br>http://www.team.net/piper=
mail/healeyshttp://autox.team.net/archive</a><br><div><br></div><br>Healeys@=
autox.team.net<br><a href=3D"http://autox.team.net/mailman/listinfo/healeys"=
target=3D"_blank" data-mce-href=3D"http://autox.team.net/mailman/listinfo/h=
ealeys">http://autox.team.net/mailman/listinfo/healeys</a><br><div><br></div=
><br>Unsubscribe/Manage: <a href=3D"http://autox.team.net/mailman/options/he=
aleys/airtightproductions@icloud.com" target=3D"_blank" data-mce-href=3D"htt=
p://autox.team.net/mailman/options/healeys/airtightproductions@icloud.com"><=
br>http://autox.team.net/mailman/options/healeys/airtightproductions@icloud.=
com</a><br><div><br></div><br><div><br></div>-------------- next part ------=
--------<br><div><br></div>An HTML attachment was scrubbed...<br><div><br></=
div>URL: <<a href=3D"http://autox.team.net/pipermail/healeys/attachments/=
20210724/8f1eb5a7/attachment-0001.htm" target=3D"_blank" data-mce-href=3D"ht=
tp://autox.team.net/pipermail/healeys/attachments/20210724/8f1eb5a7/attachme=
nt-0001.htm">http://autox.team.net/pipermail/healeys/attachments/20210724/8f=
1eb5a7/attachment-0001.htm</a>><br><div><br></div><br>-------------------=
-----------<br><div><br></div><br>Message: 8<br><div><br></div>Date: Sat, 24=
Jul 2021 13:03:25 +0000 (UTC)<br><div><br></div>From: warthodson@aol.com<br=
><div><br></div>To: "healeys@autox.team.net" <healeys@autox.team.net>,=
<br><div><br></div> "springer.mike=
51@gmail.com" <springer.mike51@gmail.com><br><div><br></div>Cc: "heale=
ys@autox.team.net" <healeys@autox.team.net><br><div><br></div>Subject:=
Re: [Healeys] Which Brake Fluid?<br><div><br></div>Message-ID: <14852513=
45.715106.1627131805514@mail.yahoo.com><br><div><br></div>Content-Type: t=
ext/plain; charset=3D"utf-8"<br><div><br></div><br>I would like to say a few=
words on behalf of silicone brake fluid.It is non-hygroscopic (does not abs=
orb moisture).It does not damage paint as do glycol fluids.<br><div><br></di=
v>A newly rebuilt and scrupulously clean brake system filled with silicone f=
luid should outlast a system filled with glycol fluid by several times.<br><=
div><br></div>The military specifies Silicone brake fluid for a reason.?<br>=
<div><br></div><br>Gary Hodson<br><div><br></div><br><div><br></div><br>On J=
uly 23, 2021 at 2:05 PM, Michael MacLean via Healeys <healeys@autox.team.=
net> wrote:<br><div><br></div><br><div><br></div>The BN2 is at the point w=
here it is time to fill and bleed the new brake system.? Now comes the time t=
o decide whether to go with DOT 3/4 brake fluid or try silicone.? Any recomm=
endations,? advice or warnings on this decision?Mike MacLean<br><div><br></d=
iv><br>-------------- next part --------------<br><div><br></div>An HTML att=
achment was scrubbed...<br><div><br></div>URL: <<a href=3D"http://autox.t=
eam.net/pipermail/healeys/attachments/20210724/1759f0fb/attachment-0001.htm"=
target=3D"_blank" data-mce-href=3D"http://autox.team.net/pipermail/healeys/=
attachments/20210724/1759f0fb/attachment-0001.htm">http://autox.team.net/pip=
ermail/healeys/attachments/20210724/1759f0fb/attachment-0001.htm</a>><br>=
<div><br></div><br>------------------------------<br><div><br></div><br>Mess=
age: 9<br><div><br></div>Date: Sat, 24 Jul 2021 09:18:38 -0400<br><div><br><=
/div>From: Michael Oritt <michael.oritt@gmail.com><br><div><br></div>T=
o: warthodson@aol.com<br><div><br></div>Cc: "healeys@autox.team.net" <hea=
leys@autox.team.net>,<br><div><br></div> &nb=
sp; "springer.mike51@gmail.com" <springer.mike51@gmail.com><br><=
div><br></div>Subject: Re: [Healeys] Which Brake Fluid?<br><div><br></div>Me=
ssage-ID:<br><div><br></div> <C=
APTa0B4CdEdqt6orZf-ujz=3DDi5KjYAHKAekuhPFq1hfgDAFg=3Dw@mail.gmail.com><br=
><div><br></div>Content-Type: text/plain; charset=3D"utf-8"<br><div><br></di=
v><br>"The military specifies Silicone brake fluid for a reason"<br><div><br=
></div><br>Not necessarily a good one.<br><div><br></div><br>Best--Michael O=
ritt<br><div><br></div><br>On Sat, Jul 24, 2021 at 9:04 AM warthodson--- via=
Healeys <<br><div><br></div>healeys@autox.team.net> wrote:<br><div><b=
r></div><br>> I would like to say a few words on behalf of silicone brake=
fluid.<br><div><br></div>> It is non-hygroscopic (does not absorb moistu=
re).<br><div><br></div>> It does not damage paint as do glycol fluids.<br=
><div><br></div>> A newly rebuilt and scrupulously clean brake system fil=
led with silicone<br><div><br></div>> fluid should outlast a system fille=
d with glycol fluid by several times.<br><div><br></div>> The military sp=
ecifies Silicone brake fluid for a reason.<br><div><br></div>><br><div><b=
r></div>> Gary Hodson<br><div><br></div>><br><div><br></div>><br><d=
iv><br></div>><br><div><br></div>> On July 23, 2021 at 2:05 PM, Michae=
l MacLean via Healeys <<br><div><br></div>> healeys@autox.team.net>=
wrote:<br><div><br></div>><br><div><br></div>> The BN2 is at the poin=
t where it is time to fill and bleed the new brake<br><div><br></div>> sy=
stem. Now comes the time to decide whether to go with DOT 3/4 brake<br=
><div><br></div>> fluid or try silicone. Any recommendations, =
advice or warnings on this<br><div><br></div>> decision?<br><div><br></d=
iv>> Mike MacLean<br><div><br></div>><br><div><br></div>><br><div><=
br></div>> _______________________________________________<br><div><br></=
div>> Support Team.Net <a href=3D"http://www.team.net/donate.html" target=
=3D"_blank" data-mce-href=3D"http://www.team.net/donate.html">http://www.tea=
m.net/donate.html</a><br><div><br></div>> Suggested annual donation =
$12.75<br><div><br></div>><br><div><br></div>> Archive: <a href=3D"ht=
tp://www.team.net/pipermail/healeys" target=3D"_blank" data-mce-href=3D"http=
://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a>=
<br><div><br></div>> <a href=3D"http://autox.team.net/archive" target=3D"=
_blank" data-mce-href=3D"http://autox.team.net/archive">http://autox.team.ne=
t/archive</a><br><div><br></div>><br><div><br></div>> Healeys@autox.te=
am.net<br><div><br></div>> <a href=3D"http://autox.team.net/mailman/listi=
nfo/healeys" target=3D"_blank" data-mce-href=3D"http://autox.team.net/mailma=
n/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a><br><d=
iv><br></div>><br><div><br></div>> Unsubscribe/Manage:<br><div><br></d=
iv>> <a href=3D"http://autox.team.net/mailman/options/healeys/michael.ori=
tt@gmail.com" target=3D"_blank" data-mce-href=3D"http://autox.team.net/mailm=
an/options/healeys/michael.oritt@gmail.com"><br>http://autox.team.net/mailma=
n/options/healeys/michael.oritt@gmail.com</a><br><div><br></div>><br><div=
><br></div>><br><div><br></div><br>-- <br><div><br></div>Best--Michael<br=
><div><br></div>-------------- next part --------------<br><div><br></div>An=
HTML attachment was scrubbed...<br><div><br></div>URL: <<a href=3D"http:=
//autox.team.net/pipermail/healeys/attachments/20210724/a5900d57/attachment-=
0001.htm" target=3D"_blank" data-mce-href=3D"http://autox.team.net/pipermail=
/healeys/attachments/20210724/a5900d57/attachment-0001.htm">http://autox.tea=
m.net/pipermail/healeys/attachments/20210724/a5900d57/attachment-0001.htm</a=
>><br><div><br></div><br>------------------------------<br><div><br></div=
><br>Message: 10<br><div><br></div>Date: Sat, 24 Jul 2021 15:33:05 +0200 (CE=
ST)<br><div><br></div>From: Kees Oudesluijs <coudesluijs@upcmail.nl><b=
r><div><br></div>To: Michael Oritt <michael.oritt@gmail.com>, Michael O=
ritt via Healeys<br><div><br></div>  =
; <healeys@autox.team.net>, warthodson@aol.com<br><div><br></div>Subje=
ct: Re: [Healeys] Which Brake Fluid?<br><div><br></div>Message-ID: <12043=
16342.319344.1627133585866@mail.ziggo.nl><br><div><br></div>Content-Type:=
text/plain; charset=3D"utf-8"<br><div><br></div><br>Perhaps the military al=
so specify corrosion proof/lined/SS hydraulic parts??<br><div><br></div>----=
---------- next part --------------<br><div><br></div>An HTML attachment was=
scrubbed...<br><div><br></div>URL: <<a href=3D"http://autox.team.net/pip=
ermail/healeys/attachments/20210724/77423e27/attachment-0001.htm" target=3D"=
_blank" data-mce-href=3D"http://autox.team.net/pipermail/healeys/attachments=
/20210724/77423e27/attachment-0001.htm">http://autox.team.net/pipermail/heal=
eys/attachments/20210724/77423e27/attachment-0001.htm</a>><br><div><br></=
div><br>------------------------------<br><div><br></div><br>Message: 11<br>=
<div><br></div>Date: Sat, 24 Jul 2021 13:38:04 +0000 (UTC)<br><div><br></div=
>From: warthodson@aol.com<br><div><br></div>To: "michael.oritt@gmail.com" &l=
t;michael.oritt@gmail.com><br><div><br></div>Cc: "healeys@autox.team.net"=
<healeys@autox.team.net>,<br><div><br></div> &=
nbsp; "springer.mike51@gmail.com" <springer.mike51@gmail.com&=
gt;<br><div><br></div>Subject: Re: [Healeys] Which Brake Fluid?<br><div><br>=
</div>Message-ID: <731761970.726376.1627133884098@mail.yahoo.com><br><=
div><br></div>Content-Type: text/plain; charset=3D"utf-8"<br><div><br></div>=
<br>You really believe that?<br><div><br></div><br>-----Original Message----=
-<br><div><br></div>From: Michael Oritt <michael.oritt@gmail.com><br><=
div><br></div>To: warthodson@aol.com<br><div><br></div>Cc: healeys@autox.tea=
m.net <healeys@autox.team.net>; springer.mike51@gmail.com <springer=
.mike51@gmail.com><br><div><br></div>Sent: Sat, Jul 24, 2021 8:18 am<br><=
div><br></div>Subject: Re: [Healeys] Which Brake Fluid?<br><div><br></div><b=
r>"The military specifies Silicone brake fluid for a reason"<br><div><br></d=
iv>Not necessarily a good one.<br><div><br></div>Best--Michael Oritt<br><div=
><br></div>On Sat, Jul 24, 2021 at 9:04 AM warthodson--- via Healeys <hea=
leys@autox.team.net> wrote:<br><div><br></div><br>I would like to say a f=
ew words on behalf of silicone brake fluid.It is non-hygroscopic (does not a=
bsorb moisture).It does not damage paint as do glycol fluids.<br><div><br></=
div>A newly rebuilt and scrupulously clean brake system filled with silicone=
fluid should outlast a system filled with glycol fluid by several times.<br=
><div><br></div>The military specifies Silicone brake fluid for a reason.?<b=
r><div><br></div><br>Gary Hodson<br><div><br></div><br><div><br></div><br>On=
July 23, 2021 at 2:05 PM, Michael MacLean via Healeys <healeys@autox.tea=
m.net> wrote:<br><div><br></div><br><div><br></div>The BN2 is at the poin=
t where it is time to fill and bleed the new brake system.? Now comes the ti=
me to decide whether to go with DOT 3/4 brake fluid or try silicone.? Any re=
commendations,? advice or warnings on this decision?Mike MacLean<br><div><br=
></div><br>_______________________________________________<br><div><br></div=
>Support Team.Net <a href=3D"http://www.team.net/donate.html" target=3D"_bla=
nk" data-mce-href=3D"http://www.team.net/donate.html">http://www.team.net/do=
nate.html</a><br><div><br></div>Suggested annual donation? $12.75<br><div><b=
r></div><br>Archive: <a href=3D"http://www.team.net/pipermail/healeys" targe=
t=3D"_blank" data-mce-href=3D"http://www.team.net/pipermail/healeys">http://=
www.team.net/pipermail/healeys</a><a href=3D"http://autox.team.net/archive" t=
arget=3D"_blank" data-mce-href=3D"http://autox.team.net/archive">http://auto=
x.team.net/archive</a><br><div><br></div><br>Healeys@autox.team.net<br><a hr=
ef=3D"http://autox.team.net/mailman/listinfo/healeys" target=3D"_blank" data=
-mce-href=3D"http://autox.team.net/mailman/listinfo/healeys">http://autox.te=
am.net/mailman/listinfo/healeys</a><br><div><br></div><br>Unsubscribe/Manage=
: <a href=3D"http://autox.team.net/mailman/options/healeys/michael.oritt@gma=
il.com" target=3D"_blank" data-mce-href=3D"http://autox.team.net/mailman/opt=
ions/healeys/michael.oritt@gmail.com"><br>http://autox.team.net/mailman/opti=
ons/healeys/michael.oritt@gmail.com</a><br><div><br></div><br><div><br></div=
><br><div><br></div>-- <br><div><br></div>Best--Michael<br><div><br></div>--=
------------ next part --------------<br><div><br></div>An HTML attachment w=
as scrubbed...<br><div><br></div>URL: <<a href=3D"http://autox.team.net/p=
ipermail/healeys/attachments/20210724/7b3edc21/attachment-0001.htm" target=3D=
"_blank" data-mce-href=3D"http://autox.team.net/pipermail/healeys/attachment=
s/20210724/7b3edc21/attachment-0001.htm">http://autox.team.net/pipermail/hea=
leys/attachments/20210724/7b3edc21/attachment-0001.htm</a>><br><div><br><=
/div><br>------------------------------<br><div><br></div><br>Message: 12<br=
><div><br></div>Date: Sat, 24 Jul 2021 09:38:53 -0400<br><div><br></div>From:=
Michael Oritt <michael.oritt@gmail.com><br><div><br></div>To: Michael=
MacLean <springer.mike51@gmail.com><br><div><br></div>Cc: Ahealey hel=
p <healeys@autox.team.net><br><div><br></div>Subject: Re: [Healeys] Wh=
ich Brake Fluid?<br><div><br></div>Message-ID:<br><div><br></div>  =
; <CAPTa0B5qLUzADh9=3DmaWD1w0mW6-+rRQN3W3Ow=
eoJ2B3CuakUYQ@mail.gmail.com><br><div><br></div>Content-Type: text/plain;=
charset=3D"utf-8"<br><div><br></div><br>Michael--<br><div><br></div><br>Bot=
h have pluses and minuses--I simply feel that DOT 3/4 has more of the<br><di=
v><br></div>former and fewer of the latter than does silicone, but that's ju=
st me.<br><div><br></div><br>Best--Michael Oritt<br><div><br></div><br>On Fri=
, Jul 23, 2021 at 5:04 PM Michael MacLean via Healeys <<br><div><br></div=
>healeys@autox.team.net> wrote:<br><div><br></div><br>> The BN2 is at t=
he point where it is time to fill and bleed the new brake<br><div><br></div>=
> system. Now comes the time to decide whether to go with DOT 3/4 b=
rake<br><div><br></div>> fluid or try silicone. Any recommendations=
, advice or warnings on this<br><div><br></div>> decision?<br><div>=
<br></div>> Mike MacLean<br><div><br></div>> _________________________=
______________________<br><div><br></div>> Support Team.Net <a href=3D"ht=
tp://www.team.net/donate.html" target=3D"_blank" data-mce-href=3D"http://www=
.team.net/donate.html">http://www.team.net/donate.html</a><br><div><br></div=
>> Suggested annual donation $12.75<br><div><br></div>><br><div>=
<br></div>> Archive: <a href=3D"http://www.team.net/pipermail/healeys" ta=
rget=3D"_blank" data-mce-href=3D"http://www.team.net/pipermail/healeys">http=
://www.team.net/pipermail/healeys</a><br><div><br></div>> <a href=3D"http=
://autox.team.net/archive" target=3D"_blank" data-mce-href=3D"http://autox.t=
eam.net/archive">http://autox.team.net/archive</a><br><div><br></div>><br=
><div><br></div>> Healeys@autox.team.net<br><div><br></div>> <a href=3D=
"http://autox.team.net/mailman/listinfo/healeys" target=3D"_blank" data-mce-=
href=3D"http://autox.team.net/mailman/listinfo/healeys">http://autox.team.ne=
t/mailman/listinfo/healeys</a><br><div><br></div>><br><div><br></div>>=
Unsubscribe/Manage:<br><div><br></div>> <a href=3D"http://autox.team.net=
/mailman/options/healeys/michael.oritt@gmail.com" target=3D"_blank" data-mce=
-href=3D"http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.c=
om"><br>http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.co=
m</a><br><div><br></div>><br><div><br></div>><br><div><br></div><br>--=
<br><div><br></div>Best--Michael<br><div><br></div>-------------- next part=
--------------<br><div><br></div>An HTML attachment was scrubbed...<br><div=
><br></div>URL: <<a href=3D"http://autox.team.net/pipermail/healeys/attac=
hments/20210724/bef47294/attachment-0001.htm" target=3D"_blank" data-mce-hre=
f=3D"http://autox.team.net/pipermail/healeys/attachments/20210724/bef47294/a=
ttachment-0001.htm">http://autox.team.net/pipermail/healeys/attachments/2021=
0724/bef47294/attachment-0001.htm</a>><br><div><br></div><br>------------=
------------------<br><div><br></div><br>Subject: Digest Footer<br><div><br>=
</div><br>_______________________________________________<br><div><br></div>=
Healeys mailing list<br><div><br></div>Healeys@autox.team.net<br><a href=3D"=
http://autox.team.net/mailman/listinfo/healeys" target=3D"_blank" data-mce-h=
ref=3D"http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net=
/mailman/listinfo/healeys</a><br><div><br></div><br>archives: <a href=3D=
"http://autox.team.net/archive" target=3D"_blank" data-mce-href=3D"http://au=
tox.team.net/archive">http://autox.team.net/archive</a><br><div><br></div><b=
r><div><br></div><br>------------------------------<br><div><br></div><br>En=
d of Healeys Digest, Vol 14, Issue 268<br><div><br></div>*******************=
*********************<br></div></div></div><div><br></div><div><br></div><sp=
an>_______________________________________________</span><br><span>Support T=
eam.Net http://www.team.net/donate.html</span><br><span>Suggested annual don=
ation $12.75</span><br><span></span><br><span>Archive: http://www.team=
.net/pipermail/healeys http://autox.team.net/archive</span><br><span></span>=
<br><span>Healeys@autox.team.net</span><br><span>http://autox.team.net/mailm=
an/listinfo/healeys</span><br><span></span><br><span>Unsubscribe/Manage: htt=
p://autox.team.net/mailman/options/healeys/fsufan1952@yahoo.com</span><br><s=
pan></span><br></div></blockquote></div></body></html>=
--Apple-Mail-FA3187AA-F986-421A-9F8E-A97FBC2576F1--
--===============7607750828745420448==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============7607750828745420448==--
|