The red and blue arrows are what exists on #724, and no other holes.
When I asked Roger Moment he sent me a photo of his Hundred with the
same configuaration. Moral of the story seems to be that you don't
want to tighten that screw hanging out in the air as tight as the
other one.
If your fuel ines will adjust to the other pair of holes, be my guest
if you like.
-Roland
BN1 #724
On Tue, 2 Jul 2019 04:27:18 +0000 (UTC), you wrote:
>I am trying to install the fuel pump to my BN2. The back wall behind the
>seats where it is located has a Swiss cheese quality about it. There are too
>many holes back there. Can someone please tell me from looking at the
>picture, if the two pump mounting screws should go in the holes below the blue
>arrows or the blue and red arrows. I'm leaning on the blue arrows because in
>the middle of the red and blue arrows is a raised ledge and that doesn't' seem
>right. Those are the only choices with the correct spacing for the two
>mounting screws on the pump.
>Mike MacLean
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
ox.team.net
|