--===============1955749820126484805==
boundary=Apple-Mail-81E88A01-3C4A-4004-BBF6-1A20C8129896
Content-Transfer-Encoding: 7bit
--Apple-Mail-81E88A01-3C4A-4004-BBF6-1A20C8129896
charset=utf-8
Content-Transfer-Encoding: quoted-printable
Hi
The glass sits in a =E2=80=9Dframe=E2=80=9D that is fitted in the top of the=
instrument can. Use a small screwdriver, or even a knife, to carefully sepa=
rate the frame from the can. Be careful so you don=E2=80=99t cut yourself. T=
he edge of the frame can be seen when the chromed bezel has been removed, wh=
ich also can be a challenge. Normally the glass can be removed without remov=
ing the frame, there is a rubber seal between the glass and frame. But you c=
an not get the workings out of the can without removing the frame.
Per
Skickat fr=C3=A5n min iPhone
> 6 mars 2019 kl. 13:43 skrev BJ8Healeys <sbyers@ec.rr.com>:
>=20
> That's why I said use the solvent sparingly. It did not damage anything o=
n my tach face, but I was sensitive to that possibility and took my time wit=
h it. I let the solvent wick itself into the joint and kept prying gently.
> =20
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> AHCA Delegate at Large
> Havelock, NC=20
> =20
> =20
> From: Tom [mailto:ah3000me@gmail.com]=20
> Sent: Tuesday, March 05, 2019 9:09 PM
> To: Healey Mail List
> Cc: BJ8Healeys
> Subject: Re: [Healeys] BJ8 tach disassembly
> =20
> Michael, Mike, Steve,
> =20
> Thanks for your comments! =20
> =20
> Quick question... can a solvent damage the face? I think I'd be bette=
r off damaging the glass than damaging the face.
> =20
> - Tom
> =20
> =20
> On Tue, Mar 5, 2019 at 7:42 PM BJ8Healeys <sbyers@ec.rr.com> wrote:
> I dribbled a solvent sparingly (acetone or 3M adhesive remover, I forget w=
hich -- or maybe both) around the edges of the glass. Eventually the bond r=
eleased.=20
> =20
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> AHCA Delegate at Large
> Havelock, NC=20
> =20
> =20
> From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of Michael=
Salter
> Sent: Tuesday, March 05, 2019 3:48 PM
> To: Tom
> Cc: Healey Mail List
> Subject: Re: [Healeys] BJ8 tach disassembly
> =20
> Hi Tom,
> What you have encountered is not uncommon. The manufacturers seemed to use=
an adhesive of some sort to secure the rim and the glass in position and it=
dries out and becomes very hard.
> I would recommend putting the 2 small screws back in as the mechanism does=
not have to come out at this stage.
> You have to very gently pry the glass and inner rim, which is under the gl=
ass to get it out.
> You need to get a blade under the edge of the inner rim to avoid chipping t=
he glass.
> As I recall there is a slot in the case that you can use as a starting poi=
nt.
> Take your time and gently work away at it ... it will move eventually.
> =20
> M
> =20
> On Wed, Mar 6, 2019 at 9:15 AM Tom <ah3000me@gmail.com> wrote:
> Hi everyone,
> =20
> I have some white dust inside the BJ8 tach that I'd like to clean up. I=
found disassembly instruction on John Simm's site. After removing the trim=
ring, and undoing the two screws holding the mechanism to the case, the gla=
ss face is firmly stuck to the case. =20
> =20
> If I can pop the glass face off, I can easily clean it with a can of compr=
essed air. But the glass face is stuck, and I don't want to break something=
. Anyone have any ideas how to do this?
> =20
> thanks again,
> =20
> Tom
> =20
> =20
> =20
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>=20
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archi=
ve
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaels=
alter@gmail.com
>=20
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>=20
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archi=
ve
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ah3000me=
@gmail.com
>=20
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>=20
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archi=
ve
>=20
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>=20
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per@scho=
erner.se
>=20
--Apple-Mail-81E88A01-3C4A-4004-BBF6-1A20C8129896
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><meta http-equiv=3D"content-type" content=3D"text/html; charset=3D=
utf-8"></head><body dir=3D"auto"><br>Hi<div>The glass sits in a =E2=80=9Dfra=
me=E2=80=9D that is fitted in the top of the instrument can. Use a small scr=
ewdriver, or even a knife, to carefully separate the frame from the can. Be c=
areful so you don=E2=80=99t cut yourself. The edge of the frame can be seen w=
hen the chromed bezel has been removed, which also can be a challenge. Norma=
lly the glass can be removed without removing the frame, there is a rubber s=
eal between the glass and frame. But you can not get the workings out of the=
can without removing the frame.</div><div><br></div><div>Per<br><div id=3D"=
AppleMailSignature" dir=3D"ltr">Skickat fr=C3=A5n min iPhone</div><div dir=3D=
"ltr"><br>6 mars 2019 kl. 13:43 skrev BJ8Healeys <<a href=3D"mailto:sbyer=
s@ec.rr.com">sbyers@ec.rr.com</a>>:<br><br></div><blockquote type=3D"cite=
"><div dir=3D"ltr"><meta http-equiv=3D"Content-Type" content=3D"text/html; c=
harset=3Dutf-8"><meta name=3D"Generator" content=3D"Microsoft Word 12 (filte=
red medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:"Comic Sans MS";
panose-1:3 15 7 2 3 3 2 2 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
span.EmailStyle17
{mso-style-type:personal-reply;
font-family:"Comic Sans MS";
color:#002060;
font-weight:normal;
font-style:normal;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--><div class=3D"WordSection1"><p class=3D"Ms=
oNormal"><span style=3D"font-size:11.0pt;font-family:"Comic Sans MS&quo=
t;;color:#002060">That's why I said use the solvent sparingly. It did n=
ot damage anything on my tach face, but I was sensitive to that possibility a=
nd took my time with it. I let the solvent wick itself into the joint a=
nd kept prying gently.<o:p></o:p></span></p><p class=3D"MsoNormal"><span sty=
le=3D"font-size:11.0pt;font-family:"Comic Sans MS";color:#002060">=
<o:p> </o:p></span></p><p class=3D"MsoNormal"><span style=3D"font-size:=
11.0pt;font-family:"Comic Sans MS";color:#002060">Steve Byers</spa=
n><span style=3D"font-size:11.0pt;font-family:"Calibri","sans=
-serif";color:#002060"><o:p></o:p></span></p><p class=3D"MsoNormal"><sp=
an style=3D"font-size:11.0pt;font-family:"Comic Sans MS";color:#00=
2060">HBJ8L/36666</span><span style=3D"font-size:11.0pt;font-family:"Ca=
libri","sans-serif";color:#002060"><o:p></o:p></span></p><p c=
lass=3D"MsoNormal"><span style=3D"font-size:11.0pt;font-family:"Comic S=
ans MS";color:#002060">BJ8 Registry</span><span style=3D"font-size:11.0=
pt;font-family:"Calibri","sans-serif";color:#002060"><o:=
p></o:p></span></p><p class=3D"MsoNormal"><span style=3D"font-size:11.0pt;fo=
nt-family:"Comic Sans MS";color:#002060">AHCA Delegate at Large</s=
pan><span style=3D"font-size:11.0pt;font-family:"Calibri","sa=
ns-serif";color:#002060"><o:p></o:p></span></p><p class=3D"MsoNormal"><=
span style=3D"font-size:11.0pt;font-family:"Comic Sans MS";color:#=
002060">Havelock, NC </span><span style=3D"font-size:11.0pt;font-famil=
y:"Calibri","sans-serif";color:#002060"><o:p></o:p></spa=
n></p><p class=3D"MsoNormal"><span style=3D"font-size:11.0pt;font-family:&qu=
ot;Calibri","sans-serif";color:#002060"><o:p> </o:p></sp=
an></p><p class=3D"MsoNormal"><span style=3D"font-size:11.0pt;font-family:&q=
uot;Comic Sans MS";color:#002060"><o:p> </o:p></span></p><div styl=
e=3D"border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in"><=
p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"T=
ahoma","sans-serif"">From:</span></b><span style=3D"font-size=
:10.0pt;font-family:"Tahoma","sans-serif""> Tom [<a href=
=3D"mailto:ah3000me@gmail.com">mailto:ah3000me@gmail.com</a>] <br><b>Sent:</=
b> Tuesday, March 05, 2019 9:09 PM<br><b>To:</b> Healey Mail List<br><b>Cc:<=
/b> BJ8Healeys<br><b>Subject:</b> Re: [Healeys] BJ8 tach disassembly<o:p></o=
:p></span></p></div><p class=3D"MsoNormal"><o:p> </o:p></p><div><p clas=
s=3D"MsoNormal">Michael, Mike, Steve,<o:p></o:p></p><div><p class=3D"MsoNorm=
al"><o:p> </o:p></p></div><div><p class=3D"MsoNormal">Thanks for your c=
omments! <o:p></o:p></p></div><div><p class=3D"MsoNormal"><o:p>&n=
bsp;</o:p></p></div><div><p class=3D"MsoNormal">Quick question... &nbs=
p;can a solvent damage the face? I think I'd be better off dama=
ging the glass than damaging the face.<o:p></o:p></p></div><div><p class=3D"=
MsoNormal"><o:p> </o:p></p></div><div><p class=3D"MsoNormal">- Tom<o:p>=
</o:p></p></div><div><p class=3D"MsoNormal"><o:p> </o:p></p></div></div=
><p class=3D"MsoNormal"><o:p> </o:p></p><div><div><p class=3D"MsoNormal=
">On Tue, Mar 5, 2019 at 7:42 PM BJ8Healeys <<a href=3D"mailto:sbyers@ec.=
rr.com">sbyers@ec.rr.com</a>> wrote:<o:p></o:p></p></div><blockquote styl=
e=3D"border:none;border-left:solid #CCCCCC 1.0pt;padding:0in 0in 0in 6.0pt;m=
argin-left:4.8pt;margin-right:0in"><div><div><p class=3D"MsoNormal" style=3D=
"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D"font-siz=
e:11.0pt;font-family:"Comic Sans MS";color:#002060">I dribbled a s=
olvent sparingly (acetone or 3M adhesive remover, I forget which -- or maybe=
both) around the edges of the glass. Eventually the bond released.&nb=
sp; </span><o:p></o:p></p><p class=3D"MsoNormal" style=3D"mso-margin-top-alt=
:auto;mso-margin-bottom-alt:auto"><span style=3D"font-size:11.0pt;font-famil=
y:"Comic Sans MS";color:#002060"> </span><o:p></o:p></p><p cl=
ass=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:aut=
o"><span style=3D"font-size:11.0pt;font-family:"Comic Sans MS";col=
or:#002060">Steve Byers</span><o:p></o:p></p><p class=3D"MsoNormal" style=3D=
"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D"font-siz=
e:11.0pt;font-family:"Comic Sans MS";color:#002060">HBJ8L/36666</s=
pan><o:p></o:p></p><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;m=
so-margin-bottom-alt:auto"><span style=3D"font-size:11.0pt;font-family:"=
;Comic Sans MS";color:#002060">BJ8 Registry</span><o:p></o:p></p><p cla=
ss=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto=
"><span style=3D"font-size:11.0pt;font-family:"Comic Sans MS";colo=
r:#002060">AHCA Delegate at Large</span><o:p></o:p></p><p class=3D"MsoNormal=
" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D=
"font-size:11.0pt;font-family:"Comic Sans MS";color:#002060">Havel=
ock, NC </span><o:p></o:p></p><p class=3D"MsoNormal" style=3D"mso-marg=
in-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D"font-size:11.0pt;=
font-family:"Calibri","sans-serif";color:#002060"> =
</span><o:p></o:p></p><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:aut=
o;mso-margin-bottom-alt:auto"><span style=3D"font-size:11.0pt;font-family:&q=
uot;Comic Sans MS";color:#002060"> </span><o:p></o:p></p><div styl=
e=3D"border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in"><=
p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt=
:auto"><b><span style=3D"font-size:10.0pt;font-family:"Tahoma",&qu=
ot;sans-serif"">From:</span></b><span style=3D"font-size:10.0pt;font-fa=
mily:"Tahoma","sans-serif""> Healeys [mailto:<a href=3D"=
mailto:healeys-bounces@autox.team.net" target=3D"_blank">healeys-bounces@aut=
ox.team.net</a>] <b>On Behalf Of </b>Michael Salter<br><b>Sent:</b> Tuesday,=
March 05, 2019 3:48 PM<br><b>To:</b> Tom<br><b>Cc:</b> Healey Mail List<br>=
<b>Subject:</b> Re: [Healeys] BJ8 tach disassembly</span><o:p></o:p></p></di=
v><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-=
alt:auto"> <o:p></o:p></p><div><div><p class=3D"MsoNormal" style=3D"mso=
-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D"font-family:=
"Comic Sans MS"">Hi Tom,</span><o:p></o:p></p></div><div><p class=3D=
"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><sp=
an style=3D"font-family:"Comic Sans MS"">What you have encountered=
is not uncommon. The manufacturers seemed to use an adhesive of some sort t=
o secure the rim and the glass in position and it dries out and becomes very=
hard.</span><o:p></o:p></p></div><div><p class=3D"MsoNormal" style=3D"mso-m=
argin-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D"font-family:&q=
uot;Comic Sans MS"">I would recommend putting the 2 small screws back i=
n as the mechanism does not have to come out at this stage.</span><o:p></o:p=
></p></div><div><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-=
margin-bottom-alt:auto"><span style=3D"font-family:"Comic Sans MS"=
">You have to very gently pry the glass and inner rim, which is under the gl=
ass to get it out. </span><o:p></o:p></p></div><div><p class=3D"MsoNormal" s=
tyle=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D"f=
ont-family:"Comic Sans MS"">You need to get a blade under the edge=
of the inner rim to avoid chipping the glass.</span><o:p></o:p></p></div><d=
iv><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom=
-alt:auto"><span style=3D"font-family:"Comic Sans MS"">As I recall=
there is a slot in the case that you can use as a starting point. </span><o=
:p></o:p></p></div><div><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:a=
uto;mso-margin-bottom-alt:auto"><span style=3D"font-family:"Comic Sans M=
S"">Take your time and gently work away at it ... it will move eventual=
ly.</span><o:p></o:p></p></div><div><p class=3D"MsoNormal" style=3D"mso-marg=
in-top-alt:auto;mso-margin-bottom-alt:auto"><span style=3D"font-family:"=
;Comic Sans MS""> </span><o:p></o:p></p></div><div><p class=3D"Mso=
Normal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span s=
tyle=3D"font-family:"Comic Sans MS"">M</span><o:p></o:p></p></div>=
</div><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bot=
tom-alt:auto"> <o:p></o:p></p><div><div><p class=3D"MsoNormal" style=3D=
"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">On Wed, Mar 6, 2019 at 9=
:15 AM Tom <<a href=3D"mailto:ah3000me@gmail.com" target=3D"_blank">ah300=
0me@gmail.com</a>> wrote:<o:p></o:p></p></div><blockquote style=3D"border=
:none;border-left:solid #CCCCCC 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:=
4.8pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt"><div><p class=3D=
"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">Hi e=
veryone,<o:p></o:p></p><div><p class=3D"MsoNormal" style=3D"mso-margin-top-a=
lt:auto;mso-margin-bottom-alt:auto"> <o:p></o:p></p></div><div><p class=
=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">=
I have some white dust inside the BJ8 tach that I'd like to clean up. &=
nbsp; I found disassembly instruction on John Simm's site. After remov=
ing the trim ring, and undoing the two screws holding the mechanism to the c=
ase, the glass face is firmly stuck to the case. <o:p></o:p></p>=
</div><div><p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margi=
n-bottom-alt:auto"> <o:p></o:p></p></div><div><p class=3D"MsoNormal" st=
yle=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">If I can pop the g=
lass face off, I can easily clean it with a can of compressed air. But=
the glass face is stuck, and I don't want to break something. A=
nyone have any ideas how to do this?<o:p></o:p></p></div><div><p class=3D"Ms=
oNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"> =
<o:p></o:p></p></div><div><p class=3D"MsoNormal" style=3D"mso-margin-top-alt=
:auto;mso-margin-bottom-alt:auto">thanks again,<o:p></o:p></p></div><div><p c=
lass=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:au=
to"> <o:p></o:p></p></div><div><p class=3D"MsoNormal" style=3D"mso-marg=
in-top-alt:auto;mso-margin-bottom-alt:auto">Tom<o:p></o:p></p></div><div><p c=
lass=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-alt:au=
to"> <o:p></o:p></p></div><div><p class=3D"MsoNormal" style=3D"mso-marg=
in-top-alt:auto;mso-margin-bottom-alt:auto"> <o:p></o:p></p></div><div>=
<p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-al=
t:auto"> <o:p></o:p></p></div></div><p class=3D"MsoNormal" style=3D"mso=
-margin-top-alt:auto;margin-bottom:12.0pt">_________________________________=
______________<br>Support <a href=3D"http://Team.Net">Team.Net</a> <a href=3D=
"http://www.team.net/donate.html" target=3D"_blank">http://www.team.net/dona=
te.html</a><br>Suggested annual donation $12.75<br><br>Archive: <a hre=
f=3D"http://www.team.net/pipermail/healeys" target=3D"_blank">http://www.tea=
m.net/pipermail/healeys</a> <a href=3D"http://autox.team.net/archive" target=
=3D"_blank">http://autox.team.net/archive</a><br><br><a href=3D"mailto:Heale=
ys@autox.team.net" target=3D"_blank">Healeys@autox.team.net</a><br><a href=3D=
"http://autox.team.net/mailman/listinfo/healeys" target=3D"_blank">http://au=
tox.team.net/mailman/listinfo/healeys</a><br><br>Unsubscribe/Manage: <a href=
=3D"http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com" t=
arget=3D"_blank">http://autox.team.net/mailman/options/healeys/michaelsalter=
@gmail.com</a><o:p></o:p></p></blockquote></div></div></div><p class=3D"MsoN=
ormal" style=3D"margin-bottom:12.0pt">______________________________________=
_________<br>Support <a href=3D"http://Team.Net">Team.Net</a> <a href=3D"htt=
p://www.team.net/donate.html" target=3D"_blank">http://www.team.net/donate.h=
tml</a><br>Suggested annual donation $12.75<br><br>Archive: <a href=3D=
"http://www.team.net/pipermail/healeys" target=3D"_blank">http://www.team.ne=
t/pipermail/healeys</a> <a href=3D"http://autox.team.net/archive" target=3D"=
_blank">http://autox.team.net/archive</a><br><br><a href=3D"mailto:Healeys@a=
utox.team.net" target=3D"_blank">Healeys@autox.team.net</a><br><a href=3D"ht=
tp://autox.team.net/mailman/listinfo/healeys" target=3D"_blank">http://autox=
.team.net/mailman/listinfo/healeys</a><br><br>Unsubscribe/Manage: <a href=3D=
"http://autox.team.net/mailman/options/healeys/ah3000me@gmail.com" target=3D=
"_blank">http://autox.team.net/mailman/options/healeys/ah3000me@gmail.com</a=
><o:p></o:p></p></blockquote></div></div></div></blockquote><blockquote type=
=3D"cite"><div dir=3D"ltr"><span>___________________________________________=
____</span><br><span>Support <a href=3D"http://Team.Net">Team.Net</a> <a hre=
f=3D"http://www.team.net/donate.html">http://www.team.net/donate.html</a></s=
pan><br><span>Suggested annual donation $12.75</span><br><span></span>=
<br><span>Archive: <a href=3D"http://www.team.net/pipermail/healeys">http://=
www.team.net/pipermail/healeys</a> <a href=3D"http://autox.team.net/archive"=
>http://autox.team.net/archive</a></span><br><span></span><br><span><a href=3D=
"mailto:Healeys@autox.team.net">Healeys@autox.team.net</a></span><br><span><=
a href=3D"http://autox.team.net/mailman/listinfo/healeys">http://autox.team.=
net/mailman/listinfo/healeys</a></span><br><span></span><br><span>Unsubscrib=
e/Manage: <a href=3D"http://autox.team.net/mailman/options/healeys/per@schoe=
rner.se">http://autox.team.net/mailman/options/healeys/per@schoerner.se</a><=
/span><br><span></span><br></div></blockquote></div></body></html>=
--Apple-Mail-81E88A01-3C4A-4004-BBF6-1A20C8129896--
--===============1955749820126484805==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============1955749820126484805==--
|