There is a 10:32 hex head machine screw with a lock nut on the inside
connecting the tumbler button assy to the latch. You will need to remove the
door panel to re assemble.
David Nock
British Car Specialists
209-948-8767
www.britishcarspecialists.com
From: Tom
Sent: Monday, July 02, 2018 2:37 PM
To: Healey Mail List
Subject: [Healeys] BJ8 door lock
Hi all,
The tumbler in my bj8 door lock came out when I was locking it. It easily slips
back in but I need to make sure it stays in. How do I install it so that it
doesn't come out when I'm on the road?
Thanks, Tom
--------------------------------------------------------------------------------
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180703/69cb53cc/attachment.html>
|