This past weekend I removed the tank to extract the sending unit on my Bugeye
because of a constant reading of empty on the gauge.? As suspected, the plastic
float was filled with gasoline.? Ethanol!? While replacing the plastic float
for brass and the cork gaskets for Viton type gaskets, I also swapped out the
sending unit top cover cork gasket with a Viton type using Hylomar AF to seal
things up.? The big surprise came when I found the rheostat cavity full of
gasoline.? Must have entered through the hole in the sending unit body for the
float lever.? Anyone have experience with this?? Should I be concerned?? I
remember the original sending unit I removed form the Bugeye tank was full of a
white powdery residue around the rheostat like it had also been filled with
gasoline.? Anyone have experience with this?Mike MacLean
| | Virus-free. www.avg.com |
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180529/137c7811/attachment.html>
|