Buy a silicone gasket and you don,t have to stick it down and you can have the
panel off and on with ease.
On Apr 7, 2018, at 12:32 PM, Patrick & Caroline Quinn <p_cquinn at tpg.com.au>
wrote:
Hello
Having a lot of fun trying to stop a leak from the rear of the rocker cover of
the BN3.
It?s a standard early C-series six-cylinder and pressed steel rocker cover with
dome shape nuts.
The question is whether the accepted practice is to stick the cork gasket to
the rocker cover with no jointing compound between the gasket and cylinder
head. OR is the accepted practice to apply jointing compound to both surfaces?
Hoo Roo
Patrick Quinn
Blue Mountains, Australia
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180407/57a8f347/attachment.html>
|