Ray,
Make sure your gaskets are the same thickness as those you took out. Then
reassemble them according to the bulletin you have and test one to see if it is
in working order, likely some adjustment will be needed, I use a battery pack
to bench test them. Lots of fiddling sometimes, other times you get a good tone
right off the bat.
Jean
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Ray Juncal
<healeyray at yahoo.com>
Sent: March 8, 2018 10:53 PM
To: Healey List
Subject: [Healeys] Horns
My horns are ready to put back together thanks to help and support from folks
on the list. I'm hoping everything works and I can get things adjusted OK. The
inner workings look pretty clean so fingers crossed that electrical winding and
and wiring are good. Points carefully cleaned and new gaskets cut. Is there
anything I have missed or should look out for on re-assembly? What is the
wisdom of the list.
Thanks all
Ray
Yes I know the acorn nut is supposed to be paint and not polished. I just
couldn't help myself.
[Inline image]
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180309/2463e80e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1969.JPG
Type: image/jpeg
Size: 619692 bytes
Desc: IMG_1969.JPG
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180309/2463e80e/attachment.jpe>
|