Hi there,
Mike MacLean (rrengineer.mike at att.net) invited you to view the file "
2011-12-29 13.30.11.jpg " on Dropbox.
Mike said:
"This picture illustrates the location of the sheet metal bracket that the
trunk lid striker is mounted to. I think it was welded in the wrong spot
because the hook of the trunk lid lock does not contact the striker. Can
someone with a 100 please give me some kind of measurement where the angled
bracket is welded to the hoop support and the trunk floor? I think the body
man just thought to weld it right in the center. I suspect it is supposed to
be off center a bit to line up with the trunk lid lock hook.
Mike MacLean"
View file[1]
Enjoy!
The Dropbox team
Mike and others will be able to see when you view this file. Other files
shared with you through Dropbox may also show this info. Learn more[2] in our
help center.
[1]: https://www.dropbox.com/l/scl/AABrILrsA4EaPq1w1FK1Pnexb9fwiRwUg4Q
[2]: https://www.dropbox.com/l/AADz1QoWKQyP9QLJsNvKknygiDqsWGNp29g
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180206/af8b8877/attachment.html>
|