Thanks, Bob.? Hugely helpful!? It occurs to me that I should post a photo of
my particular nightmare!? Will do tomorrow.
Regards, D,? 1965 BJ8
On Sunday, 4 February 2018, 08:16:54 GMT-8, David Nock British Car
Specialists <healeydoc at sbcglobal.net> wrote:
The spacer should slide off. Then pull the carpet back and remove the
driveshaft. Then you can heat the nut to a slight red and remove the broken
bolt with vice grips
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
Please feel free to view an interview with the Nock's in 2009
Enjoy
www.youtube.com/watch?v=QOTTRYkbQzs
.
.
Sent from my iPad
On Feb 3, 2018, at 4:10 PM, Robert Begani <rfbegani at gmail.com> wrote:
Hi David:
Just so happens I have the Tunnel available for your viewing pleasure. See
attached photos of the bracket. ?My emergency brake has not been on the car
for several years as the cable broke. ?I could not put the brake on the
bracket because the head of one of the screws was drilled out to get it off.
My next project is to get the frozen screw out and then find a reasonable
replacement.
Regards,
Bob Begani
BJ8 67
<IMG_0408.JPG>
<IMG_0409.JPG>
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180205/e485b51e/attachment.html>
|