Replaced the original with the PBR unit a year ago. I find the brakes now to
be a bit grabby. Cannot get smooth braking on a consistent basis. I will note
that I drive the car very little so there could be other issues in the system.
Have not replaced the hoses in quite a while.
-----Original Message-----
From: Alan Seigrist <healey.nut at gmail.com>
To: Simon Lachlan <simon.lachlan at homecall.co.uk>
Cc: Healey list <healeys at autox.team.net>
Sent: Thu, Feb 1, 2018 6:33 pm
Subject: Re: [Healeys] PBR brake servo
VH 44. the PBRs are nice units.
On Tue, Jan 30, 2018 at 12:18 AM, <simon.lachlan at homecall.co.uk> wrote:
One of these has turned up, a VH40. Comes off a stalled BJ8 project. Never used.
I thought we needed VH44s in 3000s.
It?ll be to replace the (factory fitted) Girling in my Mk II BT7 which is
overdue another rebuild or retirement.
Which is correct for my car??
Thanks,
Simon.
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180201/fe07b154/attachment.html>
|